|
Cue Man Billard Products :: Cue Lathes : Deluxe Cue Smith :: Makers of the Precise Cue Smith Cue Lathes and Inlay Machine, billiard supplies, and accessories
Deluxe
Cue Smith™
This is
the machine for the serious cue maker!
Base price is
$1995.00 |
***********************
DELUXE CUE SMITH - The Cue Builder's Lathe!!!
***********************
|
|
*CUE MAKERS SPECIAL
PACKAGE #1*
|
| |
Deluxe Cue Smith (base price)
$1995.00 |
|
| |
Taper Attachments
$450.00 |
|
| |
Router, Spur Driver and Bit
$200.00 |
|
| |
Power Feed (Handwheel replacement type)
$175.00 |
|
| |
Rear Chuck
$100.00 |
|
| |
Your choice of 1/2 HP AC
step pulley motor or 1/2 HP Variable Speed DC Motor
Reversing switch installed
$50.00 |
|
| |
60 Degree Live Center
$35.00 |
|
| |
Sealer, Cleaner, Wax
$26.00 |
|
| |
Extra steady rest
$95.00 |
|
| |
Plus boring bar $8, cut off tool $8
and an extra two-way tool post $12)
Regular Price
$3154.00
Package #1 Special
price (Total Savings $159)
$2995.00
Package #2 comes with heavier
duty leadscrew Power Feed and all other options in package #1
Regular price
$3474.00
Package #2 Special
price (Total Savings $179)
$3295.00
See our SPECIALS page for
more savings and see below for more options.
|
|
 < -
This shows the Deluxe Cue Smith headstock with both chucks, the larger
handwheel, and larger tailstock. You can use the steady rest behind
or in front of the headstock. The headstock has 24 position indexing
for cutting points, slots or inlays.
|
The Deluxe Cue Smith is probably
the best cue lathe ever made in its weight and price range. It is about
a foot wide and and six feet long and weighs a little over 100 pounds.
It has the same precision dove tail bed as the other Cue Smith Lathes.
But from there up the Deluxe is heavier made. Instead of the standard
15mm spindle bore, it has a 1-3/8" plus Spindle bore. It has a
triple bearing headstock and uses the larger 2-L belt, which gives
it more torque. It has two more inches of swing than the other lathes,
and the steady rest has the larger bore also. The collets can be used
in the headstock chuck or the steady rest.
If you order the Taper Attachments up front you
get a larger handwheel on your carriage. You also get the internal spring loaded,
instant touch of a lever access to your taper bars. This makes stainless joints,
butts and shafts much easier to taper.
With the heavy duty AC motor and optional
reversing switch you can tap joints and weight bolts under power. Another
option is the rear chuck which makes working on the short sections of
the cue much faster since you don't need a collet. Both of the headstock
chucks are the same precision speed scroll chucks found on all our lathes,
except they have the larger bore. It comes mounted on a oak cabinet
with locking storage box, and includes the wrapping foot control, shaft
and butt collets, lathe pins, two cutting bits, 1/2" tailstock
chuck, concave live center and two hour video. |
LATHE
OPTIONS
The
below option prices only apply when ordering your lathe. Upgrades
may be more!
|
| Deluxe Cue Smith Lathe with 1-3/8" Spindle Bore
$1995.00 |
|
Full Size Cue Smith Lathe
with 1-3/8" Spindle Bore with single chuck.
Mounted on a cabinet like
the Deluxe, but lower proifile like the Mid Size Cue Smith)
$1695.00
1/2 HP Variable Speed
DC Motor |
|
| Taper Attachments (36") Will cost $595 to add to Deluxe later,
but only $450 up front. $450.00 |
|
| Router and Bit and Spur Driver
$200.00 |
|
Power Feed (Variable
Speed standard handwheel replacement type)
$175.00
Power Feed Auto Stop bracket.
$40.00 Trips the power feed swtich when it gets to where
you want it to stop at
Power Feed Auto Stop Electronic
type needed on package #2..
$65.00
Heavier Duty Lead Screw
Power Feed
$495.00
DC Headstock Motor with
Foot Control instead of normal AC motor option
No charge. |
|
| Rear Headstock Chuck
$100.00 |
|
| Extra Steady Rest
$95.00 |
|
| Reversing Motor Switch installed
$50.00 |
|
| 60 Degree Live Center
$35.00 |
|
Boring Bar or Cut Off
Tool
$8.00 each
Interchangeable Shaft
Taper Bars
$150 each
This option allows you
to set one totally adjustable shaft taper bar up for one taper and
set others up for different tapers and pop them on and off the lathe
to cut different shaft tapers without having to make any adjustments.
You need to add $50 to make the first shaft taper bar removable
and $150 for additional bars
Point Cutting Taper Bar.
Removable and mounts on top of the shaft bar or in place of it.
.$35.00
#2 Morse Taper Tailstock. Allows use
of most #2MT metal working tools. Includes chuck.$210.00
Thread Milling Attachment:
Includes Dremel tool, two carbide thread mill bits, and your choice
of one thread gear/ belt set: $575 on Deluxe package #1 and
$450 on Deluxe package #2 with leadscrew powerfeed.
Thread choices: 8, 10,
11, 12, 14, 16, 18 and 20 threads per inch. Extra additional thread
gear/belt combinations $65 each.
|
|
 <
- This shows the full length view. Use the router as shown with the
taper attachments and power feed to cut shafts and butts with much
less vibration than with standard tooling. You can also offset the
tailstock to cut a taper or point grooves. |
This Picture shows the Deluxe Cue Smith
cutting in points using the router and power feed.
This picture shows the Deluxe
Cue Smith milling wood threads with the
Thread Milling Attachment
option. It has the ability to mill inside and outside
threads with the included
Dremel Tool and bits. You can make clean threads for
carom cues or thread on
your, butt plates, joints and ferrules.
You can even thread the
forearm and handle together without having to tap the threads.
The variable speed sliding
headstock option and lead screw power feed.
Above shows the package
2 Deluxe turning a one piece cue between centers.
#2 Morse Taper Tailstock.
Not a replacement for the Speed Lever Tailstock,
But a great second tailstock
for drilling larger holes. $210 optional.
|
|
|
