Accessories

COMPLETE ACCESSORIES PRICE LIST (Prices are subject to change without notice)
ORDERING INFORMATION: When ordering please call Chris Hightower to place the order. Buyer pays all shipping and handling. Lathe shipping (UPS/Ground) usually costs between $50.00 and $275.00. SORRY NO C.O.D. or CREDIT CARD ORDERS ON LATHES. Advance payment with check or money order is required. We will C.O.D. most accessories and parts. We accept Credit Cards and Pay Pal for smaller orders. Make checks and money orders out to: CUE MAN BILLIARDS   444 Flint Hill Road • Aragon, GA 30104    770-684-7004
Leather Wrap Blanks LEATHER WRAP BLANKS!!!!!!
We now have quality leather wrap blanks instock. Our prices are as follows:	$6 each $55 for 10 $100 for 20
We now have quality leather wrap blanks in stock. Our prices are as follows: $6 each $55 for 10 $100 for 20 Genuine Speckled Cork, In leather we have smooth black, brown, medium tan, and gray , Textured black, blue, dark brown, medium brown, medium tan, red, white, Black, brown, burgundy, butterscotch, taupe and tan Ostrich print, Natural tan leather with no finish, Black Lizard print, Black, dark brown, medium brown, light tan and blue Gator print. Some more expensive special leathers available from time to time. Our stock changes continually so call for current stock. There is a chapter in our "Cue Building Book" on how to do leather wraps if you need instructions! ALSO SEE OUR LEATHER PAGE FOR LEATHER WRAP INSTALLATION FIXTURE.
QUICK CHANGE TOOLPOST with 2 square tool, 1 boring bar and 1 cut off tool holders. Extra holders $30 each	$135
BED EXTENSION for any Cue Smith Lathe, will snap on and off either end of the lathe. Use with house steady rest for doing one piece cues!	$125 each
HOUSE CUE STEADY REST (Cue Smith Type)	$95 each
DIAL CALIPERS- .001 -6" (for checking diameters)	$35 each
CUE BUILDING BOOK (260+ pages , completely illustrated)	$69.95 each
CUE BUILDING and REPAIR VIDEO (2.5 Hours) VHS or DVD	$50 each
ADVANCED CUE BUILDING VIDEO Volume One (Points and Inlays- almost 3 Hours DVD) ADVANCED CUE BUILDING VIDEO Volume Two (Cue Assembly, Boring, Coring, Tenons and more- Almost 2.5 Hours DVD) CUE FINISHING MADE SIMPLE VIDEO ( Cue Cote Epoxy, Super Glue, and Water Based Urethane Finishing, Re-Finishing , Carbide Sanding Mandrels, Brushing and Spraying Methods! - Almost 3 hours DVD) SEE OUR BOOK AND VIDEO PAGE FOR SPECIALS!	$50 each $50 each   $50 each
LATHE PINS for turning shafts (5/16-18, 5/16-14, 3/8-10, Cue Tech/ Scorpion style & Radius/Ball Screw) LATHE INSERTS for turning butts (5/16-18, 5/16-14, 3/8-10 & Radius/Ball Screw)	$12 each $50 set $12 each $50 per set
1/2" DRILL CHUCK with #1 or #2 MT or 3/8-24-tpi	$35 each
SMALL CONCAVE LIVE CENTER ( #1 MT)	$45 each
LARGE CONCAVE LIVE CENTER covers entire tip (#1 or #2 MT)	$45 each
SMALL or LARGE CONCAVE LIVE CENTER (3/8 shank)	$35 each
LARGE 1" DIAMETER 60 DEGREE LIVE CENTER (3/8 shank)	$35 each
SMALL DIAMETER LIVE CENTER for cutting shafts (1/2 shank) OFF-SETTING LIVE CENTER for cutting tapers (#2 or #3 Morse Taper) OFF-SETTING LIVE CENTER for cutting tapers 3/8" straight shank smaller unit	$30 each   $150 each $85each
SHAFT SEALER        $10.00 - 8oz,   $18 - Pint,  $35 - Quart
SHAFT CLEANER      $8.00 - 8oz,   $15 - Pint,  $25 - Quart
CUE WAX          $8.00 each,   2-Pack $15,   6-Pack $40    LATEX TUBING for wrapping pressure around the cue when gluing in inlays or points.  3 foot lengths  $5 each. POWER FEED AUTO STOP bracket.  It is removable and trips the powerfeed switch when your cutter reaches the place you want it to stop. $40 each (Only for the Deluxe Cue Smith.) POWER FEED AUTO STOP Electronic Type $65 METAL DUST COVER FOR BED. Eliminates getting glue, dust, or finish on bed.  $25 CORING DRILL .312" x 14" coring, air cooled. Use as first step drill when coring. .  1/2" shank     $125 CORING DRILL .650" x 14" coring, air cooled. Makes coring forearms a breeze.  1/2" shank     $150 CORING DRILL .775" x 14" coring, air cooled. Makes coring handles a breeze.    1/2" shank     $165 WEIGHT BOLT TAP Extra Long 8" 3/8-16 use .312" drill or coring drill.   $55
6" CARBIDE TIP BORING BAR (with 3/8" round shank) for boring out butt sleeves: $30    QUICK CHANGE TOOLHOLDER FOR ABOVE BORING BAR: $30 6" CARBIDE TIP BORING BAR (with square shank to fit normal toolpost) for boring out butt sleeves: $35                    MINIATURE SOLID CARBIDE BORING BAR for installing Uni-Loc, Radial pins and boring out ferrules, etc.  $35
SELF-CENTERING THREE JAW CHUCK with 3/4-16 thread.  $75 SELF-CENTERING THREE JAW CHUCK with Deluxe thread and large 1.4" bore. $100 each REAR CHUCK FOR METAL LATHE with micro screw adjusting back plate. This chuck is the same 1.4" bore self centering 3 jaw chuck we use on our Deluxe Cue Smith, but it has a special back plate with adjustable centering screws for easy accurate rear spindle mounting on many metal lathes and some cue lathes without additional machining needed.  $175 STEADY REST WITH DELUXE CHUCK mounted on it. 1.4" bore and self centering. We have the lower height Mid Size type for $175 and the Deluxe height for $200. We also have them mounted just on the bearing so you can mount it in your metal lathe steady rest or on your wood lathe $150.	$75 Each   $175 each
COMPOUND CROSS-SLIDE FOR CUE SMITH LATHE (Rotates 360 degrees for cutting short angles)	$65 each
TENON THREADER for Ferrule (5/16-18)	$40 each
TENON THREADER for Stainless Joint (5/8-11 or 5/8-18 your choice)	$45 each
SPUR DRIVER DREMEL TOOL MOUNT FOR CUE SMITH TOOLPOST (3/4-12 mount)	$20 each      $30 each
THREAD MILLING ATTACHMENT for Deluxe Cue Smith: It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads. You get your choice of three thread gears from the following thread pitch list: 8, 10, 11, 12, 14, 16, 18, or 20 threads per inch. Thread Milling Attachment with one thread, Dremel Tool and two carbide thread milling bits.....$575 Additional Thread Gear and Belt combinations are $65 each. Automatic Tip Shaper Fits on most lathe toolposts! NEW...  Larger One Inch Vertical V-Bit for cutting point grooves  $55 NEW 1.25" diameter 6 Wing Cutter with 1/4" shank $55 (Use for ultra smooth finish passes on shafts.) 1/8" Collet for using 1/8" endmills in 1/4" router for cutting stitch rings  $10
TEN BUTT/JOINT COLLETS 1.378" OD with 10 ID's from .750" to 1.312"	$75 set
SHAFT COLLETS for protecting shaft when in chuck	$3 each
CENTER DRILL SET	$20 each
CUE SMITH BELTS 2L200 $12 each, 2L140 $10 each, 3M500 $9 each, 3M315 $9 each. PINION GEAR (For use in Handwheel and Power Feed) .223" pinion $8 each, .250" pinion $12 each
EXTRA 1/4" TOOL BITS  Standard Right or Left Hand, Round Nose, Boring Bar, Cut Off Tool  $8 each or 10 for $70 mix and match okay
EXTRA TWO-WAY TOOLPOST	$12 each
CONVERSION KITS FOR LATHES: Call for quote with lathe specifications ready. (Model, Spindle size and threads per inch, etc..)
WRAPPING MOTOR WITH FOOT CONTROL	$125 UP
CROSSFEED FOR WOOD LATHE	$200 each
Shaft Wood #1 Mixed Grade Wood hand selected and graded for custom cues! 1" X 30" Hard Rock Maple Shaft Dowels or  White Ash Shaft Dowels
1-9	$12.00 each
10-19	$11.75 each
20-39	$11.50 each
40-79	$11.25 each
80 up	$11.00 each
#1 Mix Yields Approximately 50% #1 or AAA Grade 40% #1.5 & #2 or A+ to B Grades 10% #3 or C Grade
Shaft Wood #2 Mixed Grade Wood hand selected and graded for custom cues! 1" X 30" Hard Rock Maple Shaft Dowels
1-9	$8.00 each
10-19	$7.75 each
20-39	$7.50 each
40-79	$7.25 each
80 up	$7.00 each
#2 Mix Yields Approximately 20% #1 or AAA Grade 60% #1.5 & #2 or A+ to B Grades 20% #3 or C Grade
Tapered Shaft Blanks First turn Shafts #1 $21 Each, #1.5 $16 each
Second Turn 18mm #1 $22 Each, #1.5 $17 Each
Third Turn 16mm #1 $23 Each, #1.5 $18 Each, Third Turn 16mm Extra Tight grain #1.5/A+ $22
Final Sanding Size Tapered Shaft Blanks
13.5mm #1/AAA $25, #1.5/A+ $20, Extra Tight grain #1.5/A+ $24, #2/B $15 Each
13.5mm Laminated Maple Shaft   $25 Each
JOINT PIN SCREWS and INSERTS 5/16-14 Stainless Steel Joint Pins  $4 each,  5 for $17, 10 for $30 5/16-18 Stainless Steel Joint Pins  $4 each,  5 for $17, 10 for $30 3/8-10  Stainless Steel Joint Pins  $4 each,  5 for $17, 10 for $30 5/16-14 Brass Inserts  $2 each  or 5 for $8,  10 for $15 5/16-18 Brass Inserts  $2 each  or 5 for $8  10 for $15 MARTIN STYLE 3/8-10 Joint Pin Screws (with flat minor diameter) (Stainless Steel, Aluminum or Brass)  $10 each,  5 for $48, 10 for $90 Black G-10 Epoxy $12 each, 5 for $55,  10 for $100 Titanium $20 each,  5 for $95,  10 for $180 Installs with normal 3/8-10 tap and miniature boring bar. *Radius/Ball Thread 3/8" Joint Pin Screws.* (Stainless Steel, Aluminum or Brass)  $10 each,  5 for $48, 10 for $90 Black G-10 Epoxy $12 each, 5 for $55,  10 for $100 Titanium $20 each,  5 for $95,  10 for $180 Installs with Atlas Billiards Supplies tap # QRADTAP and miniature boring bar.. *Radius/Ball Thread pins are not made by Uni-Loc.*
Butt Wood
Birdseye or Tiger Maple 18" X 1.5" Turning Squares	$20 up
Bocote, Bubinga, Purple Heart, Rosewood, Shedua and other 30" partially Tapered Butt Blanks	$30 up
18" Round Maple Handles	$4 each
15" x 1" Maple Coring Dowels (turn down to size needed for coring forearms)   $3 each 18" X 1.5" TURNING SQUARES: Amboyna Burl $100, Bloodwood $20, Bocote $15, Bubinga $14, Coco Bolo $15, Ebony $45, Kingwood $20, Orange African Padauk $12, Pink Ivory $75, Purple Heart $12, Red Heart $15, Snake Wood $135, Striped Ebony $35, Thuya Burl $100, Tulip Wood $25, Wenge $15, Yellow Heart $15, Zebrawood $15, Zircote $16
CUE COTE - Custom Cue Finish! Two part Epoxy based finish. Does not need to be sprayed on. Can be brushed on then slowly rotated for a few hours to level out. Instructions included!	$45 quart
WATER BASED URETHANE - Custom Cue Finish! Very easy to use. Spray or brush on. Fast dryng. Only 15 minutes between coats.	$20 pint or $30 quart.
CUE BUFF! (Buffing Material)  Buffs most cue finshes including above.   $15 8oz