Makers of precision Cue Smithâ„¢ brand cue lathes and inlay machine!

Search results for '1" 90 Degree Vertical Side Point cutting carbide bit for milling machine (1/2" shank)'

Maximum words count is 10. In your search query was cut next part: milling machine (1/2" shank).

Grid List

Set Ascending Direction

20 Item(s)

  1. Ivory Imitation Rod (Joint Size)
    $20.00

    Ivory Imitation Rod (Joint Size) 6" long Approximately 1" OD x 6" long. This is the highest quality material we can find. Looks like the real thing. Learn More
  2. Butterfly Butt Sleeves
    Starting at $20.00

    We now have the butterfly butt sleeves glued up and turned round. 
    Each shaft has three colors of veneers in them. They are turned to 1.375" and are over 4" long. These sleeves have over 20 layers of colored veneers glued up under tons of pressure and the layers alternate the three different colors all the way through the piece, so you have thin 1/16" stripes on two sides and nice butterfly points on the other two sides of the sleeve.

    The current in stock colors are:
    #1 Blue, gray and red.
    #2 Gray, olive and red.
    #3 Brown, gray and olive.

    All look very nice as they are subdued earth tones THEY ALSO MAKE GREAT COLORED BUTT RINGS! Learn More

  3. stainless joint pin screws for cues

    Starting at: $4.50

    Stainless Joint Pin Screws

    Mix and match for discount!

    Learn More
  4. Rubber Bumpers

    Starting at: $2.00

    Rubber Bumpers

    Mix and match for discount!

    Learn More
  5. Full Splice Butt Blanks - Black Ebony into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  6. Full Splice Butt Blanks - Coco-Bolo into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  7. Full Splice Butt Blanks - Shedua into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  8. Full Splice Butt Blanks - Rosewood into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  9. Full Splice Butt Blanks - Purple Heart into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  10. Full Splice Butt Blanks - Bocote into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  11. Martin Style Joint Pins, 3/8-10 Titanium

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  12. Martin Style Joint Pins, 3/8-10 Black G-10 Epoxy

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  13. Martin Style Joint Pins, 3/8-10 Brass

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  14. Joint Pins, Martin Style 3/8-10

    Starting at: $6.00

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order*

    Learn More
  15. Martin Style Joint Pins, 3/8-10 Aluminum

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  16. Martin Style Joint Pins, 3/8-10 Stainless Steel

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  17. Phenolic Inserts

    1.25" long, .510" outside diameter alignment shoulder with 1/2" of 1/2 x 20 thread and
    .230" inside diameter. This allows you to bore and tap any 5/16" or 3/8" thread
    *Use our Miniature Boring Bar to install phenolic insert and the Joint Pin Screws below.*

    Learn More
  18. Colored Veneers
    Starting at $4.00

    Dyed Colored Veneers.

    #1 Brilliant Red
    #2 Royal Blue
    #3 Light Green
    #4 Black
    #5 Burnt Orange
    #6 Deep Purple

    All veneers are cut approximately 1/32" thick.
    The sheets are approximately 5.5" wide and 10.5" long.

    NOTE: You can get about four 1.25" point strips out of each.

    Learn More
  19. Economy Inlaid Butt Sleeves
    Starting at $25.00

    Six CNC inlaid butt sleeves. See Below:

    #1 Black sleeve with 8 imitation ivory diamonds.

    #2 Imitation ivory sleeve with 8 black diamonds

    #3 Black sleeve with 4imitation ivory ovals and 4 diamonds

    #4 Imitation ivory sleeve with 3 black ovals and 3 diamonds

    #5 Black sleeve with 6 imitation ivory fancy shapes

    #6 Imitation ivory sleeve with 6 black fancy shapes

    All 6 butt sleeves have a butt plate glued on and bored to 7/8" which makes them

    very easy to install. The sleeves and inlay material is similar to PVC or ABS.


    SPECIAL: Take one of each for only $20 each. (Total $120 per set)

    Learn More
  20. Exotic Inlaid Butt Sleeves
    Starting at $95.00

    Out of stock

    #1 Ebony with 8 Genuine Bone Ivory diamonds.
    #2 Ebony with 8 Bone Ivory Moroccan windows.
    #3 Ebony with 4 Bone Ivory fancy shapes and 4 curved diamonds.
    #4 Ebony with 8 Bone Ivory windows and 8 small diamonds.
    The inlay pockets are cut with a 1/32" bit so they don't have large radiuses.

    CALL TO ORDER Learn More

Grid List

Set Ascending Direction

20 Item(s)