Makers of precision Cue Smithâ„¢ brand cue lathes and inlay machine!

Search results for 'Black leather cue wraps'

Grid List

Set Ascending Direction

15 Item(s)

  1. Jet Black Linen Phenolic Tube (Butt Size)
    $20.00

    Jet Black Linen Phenolic Tube (Butt Size) 6" long Approximately 1.375" OD x 18mm ID x 6" long. This is the highest quality material we can find. Learn More
  2. Jet Black Linen Phenolic Tube (Wrap-Joint Size)
    $15.00

    Jet Black Linen Phenolic Tube (Wrap-Joint Size) 6" long Approximately 1.125" OD x 15mm ID x 6" long. This is the highest quality material we can find. Learn More
  3. Jet Black Linen Phenolic Tube (Joint Size)
    $12.00

    Jet Black Linen Phenolic Tube (Joint Size) 6" long Approximately .940" OD x 12mm ID x 6" long This is the highest quality material we can find. Learn More
  4. Rubber Bumpers

    Starting at: $2.00

    Rubber Bumpers

    Mix and match for discount!

    Learn More
  5. Radius/Ball Thread 3/8" Joint Pin Screws

    Starting at: $6.00

    Installs with Atlas Billiards Supplies tap # QRADTAP.
    *Radius/ball thread pins are not made by Uni-Loc.*

    Learn More
  6. Full Splice Butt Blanks - Black Ebony into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  7. Full Splice Butt Blanks - Coco-Bolo into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  8. Full Splice Butt Blanks - Shedua into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  9. Full Splice Butt Blanks - Rosewood into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  10. Full Splice Butt Blanks - Purple Heart into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  11. Full Splice Butt Blanks - Bocote into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  12. Martin Style Joint Pins, 3/8-10 Black G-10 Epoxy

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  13. Joint Pins, Martin Style 3/8-10

    Starting at: $6.00

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order*

    Learn More
  14. Colored Veneers
    Starting at $4.00

    Dyed Colored Veneers.

    #1 Brilliant Red
    #2 Royal Blue
    #3 Light Green
    #4 Black
    #5 Burnt Orange
    #6 Deep Purple

    All veneers are cut approximately 1/32" thick.
    The sheets are approximately 5.5" wide and 10.5" long.

    NOTE: You can get about four 1.25" point strips out of each.

    Learn More
  15. Economy Inlaid Butt Sleeves
    Starting at $30.00

    Six CNC inlaid butt sleeves. See Below:

    #1 Black sleeve with 8 imitation ivory diamonds.

    #2 DISCONTINUED

    #3 Black sleeve with 4 imitation ivory ovals and 4 diamonds

    #4 DISCONTINUED

    #5 Black sleeve with 6 imitation ivory propellers

    #6 Imitation ivory sleeve with 6 black propellers

    All 4 butt sleeves have a butt plate glued on and bored to 7/8" which makes them

    very easy to install. The sleeves and inlay material is similar to PVC or ABS. They can be polished to a shiny surface without any finish needed.


    SPECIAL: Take one of each for only $25 each. (Total $100 per set of four)

    Learn More

Grid List

Set Ascending Direction

15 Item(s)