Makers of precision Cue Smithâ„¢ brand cue lathes and inlay machine!

Search results for 'Black leather cue wraps'

Grid List

Set Ascending Direction

28 Item(s)

  1. Dead Center with .200" Offset
    $40.00

    Dead Center with .200" Offset for leveling cue under Inlay Machine or CNC Machine. 1/2" Shank. Learn More
  2. Router with Deluxe Multi-Position Bracket
    $250.00

    Router with Deluxe Multi-Position Mounting Bracket. Also includes spur driver and 3/4" router bit. Will work in vertical, horizontal and angled positions on our Deluxe Cue Smith Lathe. Works in Vertical position on smaller lathes. Learn More
  3. A Leather Wrap Template Adjustable Length
    $125.00

    Out of stock

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. It expands so you can just set it in your wrap groove and extend it to the ends for exact length cutting. Learn More
  4. Leather Wrap Template
    $45.00

    Out of stock

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. Learn More
  5. Router with Vertical Mounting Bracket
    $200.00

    Router with Standard Vertical Mounting Bracket. Also includes spur driver and 3/4" router bit. Will work in vertical position on our Deluxe Cue Smith Lathe and on smaller lathes. Learn More
  6. Gear Motor For Finishing
    $195.00

    This is a variable speed slow rotating gear motor to hook up to your Cue Smith lathe to apply finish like the Cue Cote or other finishes that need to the cue to slow rotate while curing. Learn More
  7. Cue Shaft Cleaner
    Starting at $8.00

    Made to use on your lathe to clean the chalk and dirt out of the shaft. Learn More
  8. A Leather Wrap Fixture
    Starting at $195.00

    Out of stock

    Cue Smith Leather Wrap Fixture
    For Cue Smith Lathes

    Includes:

    • Mounted Seaming guide
    • Wrap length and end radius template
    • 5 mixed leather wraps (our choice)
    • Length measuring sliding ruler
    • Foam glue applicators and razor blades
    • Instruction DVD

    The Cue Smith Leather Wrap Fixture is designed to work only on the Cue Smith Lathes with indexing headstocks.

    The Cue Smith Leather Wrap Fixture makes leather installation a breeze with a little practice.

    Our Deluxe Wrap Fixture comes with the Adjustable Length Leather Template instead of Standard Template and Ruler! Learn More
  9. Shaft Wood #1 Mix Grade

    Wood hand selected and graded for custom cues!

    1" X 30" Hard Rock Maple Shaft Dowels or White Ash Shaft Dowels

    #1 Mix Yields Approximately
    50% #1 or AAA Grade
    40% #1.5 & #2 or A+ to B Grades
    10% #3 or C Grade

    Learn More
  10. Router Bit - Straight 3/4" Bit
    $20.00

    Straight 3/4" Bit for tapering cues and more Learn More
  11. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, or Router mount (see Note Below), two carbide thread mill bits, and your choice of one thread gear/ belt set: $450 on Deluxe Cue Smith package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one external threading bits) $50 each.

    Extra 1/4" shank Internal Thread Milling Carbide Bit $99.95, External Thread Milling Carbide bit $35. NOTE: If you have the newer style Vertical mount Porter Cable Round Body Laminate Router you get the sturdier 1/4" shank thread mill bits and a holder for the router instead of the Dremel tool and 1/8 inch shank bits. Learn More
  12. Black Epoxy Dye
    $5.00

    Black Epoxy Dye Learn More
  13. Butterfly and Full Splice Jig
    $40.00

    For band saws and table saws (cuts angles and prongs in turning squares). Cuts the flat taper angle on a turning square for gluing your butterfly pieces to on a table saw or band saw. Also allows you to cut the v-prongs in the turning square handle part of a full splice cue on a band saw. Learn More
  14. Cue Buff: Buffing Material (Click for Replacement Product Info)
    $15.00

    Cue Buff buffing material, buffs most cue finishes including the Cue Cote Custom Cue Finish and the Water Based Urethane Custom Cue Finish. 8 oz. Good replacement products for the Cue Buff are 3M Rubbing compound and Finessit buffing material or McGuires rubbing compound and polishing material. Learn More
  15. Cue Finish Water Based Urethane (Click for Replacement Product Info)
    Starting at $20.00

    Out of stock

    The water based urethane Custom Cue Finish is very easy to use. You can spray it on, or brush it on. It's fast drying too. Only 15 minutes between coats! A good replacement product for water based urethane is General Finishes Enduro Poly Gloss Water Based Urethane. Learn More
  16. Cue Cote Custom Cue Finish (Click for Replacement Product Info)
    Starting at $25.00

    Out of stock

    Cue Cote Custom Cue Finish, is a two part epoxy based finish, that does not need to be sprayed on. Can be brushed on then slowly rotated for a few hours to level out. Instructions included! The best off the shelf replacement for Cue Cote is Klockit Kraft Kote Clock Finish Learn More
  17. Belts For Cue Smith Lathes
    Starting at $3.00

    Cue Smith Lathe Belts Learn More
  18. Dremel Mount for Cue Smith Tool Post
    $30.00

    Dremel Mount for Cue Smith Tool Post (3/4-12 mount) Learn More
  19. Cross Slide - Compound for Cue Smith Lathe
    $65.00

    Compound Cross-Slide for Cue Smith Lathe
    Rotates 360 degrees for cutting short angles.
    Includes cutting bit. Learn More
  20. Chuck - Rear Chuck for Metal Lathe
    $175.00

    Rear chuck for metal lathe, with micro screw adjusting back plate. This chuck is the same 1.4" bore self centering 3 jaw chuck we use on our Deluxe Cue Smith, but it has a special back plate with adjustable centering screws for easy accurate rear spindle mounting on many metal lathes and some cue lathes without additional machining needed. Learn More
  21. power feed auto stop bracket
    $40.00

    The power feed auto stop bracket is removable and trips the power feed switch when your cutter reaches the place you want it to stop. (Only for the Deluxe Cue Smith package one power feed type.) Learn More
  22. Latex Tubing
    $5.00

    Latex tubing for wrapping pressure around the cue when gluing in inlays or points. 3 foot lengths. Learn More
  23. Cue Wax for Shafts
    Starting at $8.00

    A special Carnuba Cue Wax blend that makes your cue shaft as smooth as silk. Learn More
  24. Cue Shaft Sealer (Click for Replacement Product Info)
    Starting at $10.00

    Out of stock

    Our Shaft Sealer is used after cleaning and before wax to seal the pores on the shaft. The best replacement product for Shaft Sealer is Mohawk Lacover 30. Learn More
  25. Chuck - Drill Chuck 1/2 Inch 3/8-24-tpi
    $45.00

    1/2" (Inch) drill chuck with 3/8-24-tpi. Replacement chuck for all Cue Smith lathes. Learn More
  26. Lathe Pins
    Starting at $12.00

    Lathe pins for turning shafts (5/16-18, 5/16-14, 3/8-10, Cue Tech/ Scorpion style & Radius/ Ball Screw). Learn More
  27. Steady Rest for House Cues
    $95.00

    House Cue Steady Rest (Cue Smith Type) Learn More
  28. Bed Extension
    Starting at $125.00

    Bed extension for any Cue Smith Lathe, will snap on and off either end of the lathe. Use with house steady rest for doing one piece cues! Learn More

Grid List

Set Ascending Direction

28 Item(s)