Makers of precision Cue Smith™ brand cue lathes and inlay machine!

Search results for 'Dremel tool'

Grid List

Set Ascending Direction

19 Item(s)

  1. Tool Bits Square not ground

    Extra 1/4" tool bits.

    • Square not ground
    • This bit is not ground so you can sharpen to make custom grooving bits etc.. Learn More
  2. Tool Bits Cut Off

    Extra 1/4" tool bits .

    • Cut Off Tool Bit
    • This bit is used for parting off material like rings and ferrule material. Learn More
  3. Tool Bits Boring Bar

    Extra 1/4" tool bits.

    • Boring Bar tool bit
    • For boring inside diameter holes from 1/2" and larger Learn More
  4. Tool Bits Round Nose

    Extra 1/4" tool bits.

    • Round Nose Tool Bit
    • For turning smoother cuts on ferrules and rings in both directions. Learn More
  5. Right and Left Hand Bits

    Extra 1/4" tool bits.

    • Standard Right or Left Hand
    • This bit is ground to used as a right hand or left hand. A right hand bit is used for facing and cutting tenons and cuts from right to left. A left hand bit cuts from left to right. Learn More
  6. Tool Bits Set of 6
    $45.00

    Extra 1/4" tool bits.(One of each)

    • Standard Right or Left Hand
    • Round Nose Tool Bit
    • Boring Bar Tool Bit
    • Cut Off Tool Bit
    • Square Nose Tool Bit
    Learn More
  7. Micro Cue Smith III™ Cue Lathe
    $1,195.00

    This is our most portable Lathe. It uses the same headstock, chuck, tailstock,and cross-slide as our Mid Size Cue Smith lathe yet is super portable. At only 36" it is very compact, and the basic unit weighs under 30 pounds, so you can take it anywhere to do on the spot cue repairs. This is all the lathe you need for tips and ferrules on two-piece cues, but that is about all it is designed to do with the lightweight motor. Learn More
  8. Deluxe Cue Smith™ Cue Lathe
    Starting at $1,995.00

    This is the machine for the serious cue maker! This shows the Deluxe Cue Smith headstock with both chucks, the larger handwheel, and larger tailstock. You can use the steady rest behind or in front of the headstock. The headstock has 24 position indexing for cutting points, slots or inlays.

    Deluxe Cue Smith (base price) $1995.00

    Additional options below included in packages one and two:

    Aluminum Storage Cabinet with 25% more storage space than the older wood cabinet $275
    Taper Attachments $495.00
    Vertical Router, Spur Driver and Bit $200.00
    Power Feed (Handwheel replacement type) $175.00
    Rear Chuck $100.00

    Choice of 1/2 HP or 3/4 HP Variable Speed DC Motor included.

    60 Degree Live Center $35.00
    Sealer, Cleaner, Wax $26.00
    Extra steady rest $95.00

    Plus boring bar $8, cut off tool $8 and an extra two-way tool post $12)
    Regular Price $3444.00
    Package #1 Special price (Total Savings $249) $3195.00

    Package #2 comes with heavier duty leadscrew Power Feed and all other options in package #1
    Regular price $3769.00
    Package #2 Special price (Total Savings $274) $3495.00
    See our SPECIALS page for more savings and see below for more options.

     

    Additional Options:

    The above Package One Deluxe without Aluminum Storage Cabinet $3045

    The above Package Two Deluxe without Aluminum Storage Cabinet $3345

    Either package comes with your choice of 1/2 HP DC Variable speed motor on sliding headstock or Stationary Headstock with 3/4 HP DC variable speed motor

    The 3/4 HP motor is strong enough for coring, but eliminates the ability to taper one piece cues with your router

    Unless you want to build 1 piece cues we strongly suggest the 3/4HP motor.

    Removable Shaft Bar $50 (Allows you to remove your shaft bar and keep the settings)

    Additional Shaft Bars $150 (Allows you to set up different bars for different tapers)

    Additional Router brackets for multi-position mounting $50

    Additional #2 Morse Taper Tailstock $210

    Thread Milling Attachment for Package 2 $450

     

     

    Learn More
  9. Toolpost - Two-Way Toolpost Tall
    $15.00

    Extra Two-Way Toolpost (Tall) Learn More
  10. A Tip Shaping Guide & Blade Rest
    $30.00

    This is a shaping guide for those who prefer to use the utility blade to hand shape the tip.

    It has 3 radius guides on the rest. Nickel, Penny and Dime size radiuses.

    This takes the guess work out of it and mounts on one side of your tool post.

    Learn More
  11. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, two carbide thread mill bits, and your choice of one thread gear/ belt set: $575 on Deluxe package #1 and $450 on Deluxe package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one exteral threading bits) $50 each.

    Learn More
  12. Toolpost - Four-Way Toolpost

    Extra Four-Way Toolpost holds four different toolbits. Learn More
  13. Toolpost - Two-Way Toolpost Regular

    Extra Two-Way Toolpost Learn More
  14. Dremel Mount for Cue Smith Tool Post
    $30.00

    Dremel Mount for Cue Smith Tool Post (3/4-12 mount) Learn More
  15. Boring Bar - 6" Carbide Tip Square Shank
    $40.00

    6" Carbide tip boring bar (with square shank to fit normal toolpost) for boring out butt sleeves. Learn More
  16. Toolpost - Boring Bar Holder for Quick Change TP 3/8"
    $30.00

    Toolpost for above boring bar: Quick Change Holder. Learn More
  17. The Cue Building Book: From Tree, To Tip, To Trade Show! Fifth Edition.
    Starting at $75.00

    By: Chris Hightower

    This is the most extensive book on cue building written to date. As the title suggests, it takes you through the complete cue building process from the sawmill, to the finished cue, to marketing your cues. It covers many things that the videos don’t. However, it is said that a picture is worth a thousand words. It covers doing work on wood lathes, metal lathes, and of course, cue lathes. It shows the table saw tapering machine, how to build your own spray booth, kiln, wood stabilizer dipping tank, collets, linen presses, inlay patterns and much more. It shows how to put on the finish with and without spraying, Irish linen and leather wraps, V-groove and butterfly points, inlays and much more.

    There is an "Advice from the Masters" chapter that gives advice to beginners from some of America’s most well known cue makers who have been building cues for decades. There is also a brief history on cue building in the USA. There is a suppliers list showing where to buy almost everything you need to build cues from shaft wood, to exotic woods and veneers, cue parts, manual and CNC machinery and small tooling. The book has nearly two hundred drawings, showing how to do the various operations and how to make the special jigs.

    It is a wealth of information contained in a format that is easy to read and refer back to. There is a section for your own notes in the back. Every beginner to intermediate cue maker should have this book and the advanced cue maker might still pick up some little tricks.

    Over 260 pages! FIFTH EDITION!

    ***INTERNET SPECIALS***
    The Cue Building Book and Any Two DVDs Only $150 Save $25 OR
    The Cue Building Book and Any Three DVDs Only $195 Save $30 OR
    The Cue Building Book and All Four DVDs Only $240 Save $35

    Learn More
  18. Toolpost - Tool Holders for Quick Change Toolpost

    Extra tool holders for Quick Change Toolpost. Extra tool holders $25 each or 5 for $20 each. Learn More
  19. Toolpost - Quick Change Toolpost System
    Starting at $135.00

    Quick Change Toolpost with 4 tool holders (Two square tool holders, one cut off blade holder and one 3/8" boring bar holder). Learn More

Grid List

Set Ascending Direction

19 Item(s)