Search results for 'Gun drill'
Starting at $2,795.00This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, leadscrew power feed, butt and shaft taper bars, ER Collet headstock with dead center / spur driver and a 1/2" drill chuck on the tailstock with 60 degree live center and vertical router as well as an auto stop.. It takes up very little room at 4 feet long. This is the perfect machine to do your butt and shaft tapering to keep your other lathes free for other aspects of cue building. The speed range is fast enough to use for sanding and can be slowed down to a crawl for shaft tapering or finishing cues..The Basic Package one unit internet special is $2795. Package two comes with everything in package one plus removable shaft bar $50, Point Taper Bar $35, one additional shaft bar $150 and a small 60 degree live center for turning shafts $30. Only $2995 Save $65 Learn More
$99.95Carbide Thread Milling Internal Bit 1/4"” shank Cuts external threads from 14 threads per inch and finer up to 1.800" long. Cuts internal threads from 10 threads per inch and finer up to 1.800" deep. Minimum drilled hole bore of 1/4" required for internal threading. Learn More
1- Ziricote 28”+ completely tapered butt
1- #1.5 Final sanding size shaft blank
1- Butt plate
2- Joint Rings
1- 3/8-10 Joint pin.
1- Rubber Bumper
For assembly instructions we suggest the Basic Cue Building and Repair DVD $50
Only requires minor machining, drilling and tapping.
Perfect for those who have a lathe that does not have
No Substitutions!Learn More
$1,995.00This lathe is specifically designed to build walking canes. However it could be used for turning other wood projects also. It comes with the larger 1.4" spindle bore headstock with 3/4HP variable speed motor and a steady rest with 1.4" chuck mounted on it just like the headstock has Learn More
Starting at $795.00This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, a three jaw chuck on the headstock and a 1/2” chuck on the tailstock. It is very portable and under 30 pounds and 4 feet long. This is the perfect second function lathe for shop or tournament work. You can do shaft cleaning, reconditioning, sanding or butt sanding and finishing on it with some accessories. The speed range is from about 200 to 2000 rpm. You can add a foot control for wrapping. Learn More
Starting at $1,995.00
This is the machine for the serious cue maker! This shows the Deluxe Cue Smith headstock with both chucks, the larger handwheel, and larger tailstock. You can use the steady rest behind or in front of the headstock. The headstock has 24 position indexing for cutting points, slots or inlays.
Deluxe Cue Smith (base price) $1995.00
Additional options below included in packages one and two:
Aluminum Storage Cabinet with 25% more storage space than the older wood cabinet $275
Taper Attachments $495.00
Vertical Router, Spur Driver and Bit $200.00
Power Feed (Handwheel replacement type) $175.00
Rear Chuck $100.00
Choice of 1/2 HP or 3/4 HP Variable Speed DC Motor included.
60 Degree Live Center $35.00
Sealer, Cleaner, Wax $26.00
Extra steady rest $95.00
Plus boring bar $8, cut off tool $8 and an extra two-way tool post $12)
Regular Price $3444.00
Package #1 Special price (Total Savings $249) $3195.00
Package #2 comes with heavier duty leadscrew Power Feed and all other options in package #1
Regular price $3769.00
Package #2 Special price (Total Savings $274) $3495.00
See our SPECIALS page for more savings and see below for more options.
The above Package One Deluxe without Aluminum Storage Cabinet $3045
The above Package Two Deluxe without Aluminum Storage Cabinet $3345
Either package comes with your choice of 1/2 HP DC Variable speed motor on sliding headstock or Stationary Headstock with 3/4 HP DC variable speed motor
The 3/4 HP motor is strong enough for coring, but eliminates the ability to taper one piece cues with your router
Unless you want to build 1 piece cues we strongly suggest the 3/4HP motor.
Removable Shaft Bar $50 (Allows you to remove your shaft bar and keep the settings)
Additional Shaft Bars $150 (Allows you to set up different bars for different tapers)
Additional Router brackets for multi-position mounting $50
Additional #2 Morse Taper Tailstock $210
Thread Milling Attachment for Package 2 $450