Makers of precision Cue Smith™ brand cue lathes and inlay machine!

Search results for 'Mother of purl'

Grid List

Set Ascending Direction

82 Item(s)

  1. Tool Bits Cut Off

    Extra 1/4" tool bits .

    • Cut Off Tool Bit
    • This bit is used for parting off material like rings and ferrule material. Learn More
  2. Tool Bits Set of 6
    $45.00

    Extra 1/4" tool bits.(One of each)

    • Standard Right or Left Hand
    • Round Nose Tool Bit
    • Boring Bar Tool Bit
    • Cut Off Tool Bit
    • Square Nose Tool Bit
    Learn More
  3. Cue Smith Tapering Machine
    Starting at $2,795.00

    This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, leadscrew power feed, butt and shaft taper bars, ER Collet headstock with dead center / spur driver and a 1/2" drill chuck on the tailstock with 60 degree live center and vertical router as well as an auto stop.. It takes up very little room at 4 feet long. This is the perfect machine to do your butt and shaft tapering to keep your other lathes free for other aspects of cue building. The speed range is fast enough to use for sanding and can be slowed down to a crawl for shaft tapering or finishing cues..The Basic Package one unit internet special is $2795. Package two comes with everything in package one plus removable shaft bar $50, Point Taper Bar $35, one additional shaft bar $150 and a small 60 degree live center for turning shafts $30. Only $2995 Save $65 Learn More
  4. Buckeye Burl Wood Turning Squares for butt sleeves and handles.
    $35.00

    Buckeye Burl wood inlay slab.
    1-1/2" x 1-1/2" x 4" Colors vary from beautiful grayish blue to cream and often mixed color. Nice for making butt sleeves or segmented handles. Will match colors for 2 or 3 piece handles. Custom sizes available. Email us with your needs. Learn More
  5. Buckeye Burl Wood Inlay Slab
    $10.00

    Buckeye Burl wood inlay slab.
    3/16" x 1-1/2" x 5" Colors vary from beautiful grayish blue to cream and often mixed color. Nice for inlays or knife scales. Custom sizes available. Email us with your needs. Learn More
  6. White Diamond Jump Break Tip

    Picone White Diamond tips are a multi-layered tip. Made from a specially selected fiber, they go through an 11 step process before becoming a finished tip. Each tip is inspected before packaging to the insure you the highest quality. 14mm Learn More
  7. The Road Bridge
    $95.00

    The Road Bridge is a telescoping portable bridge with a very unique bridge head design that also pivots to any position. It allows you to shoot center, ball as well as top and bottom spin. The tall design also allows you to shoot over multiple balls that normal bridges will not reach. You can rest your hand on it for super jump shots or masse shots. You can also use it for jump shots in the middle of the table. Learn More
  8. A Leather Wrap Template Adjustable Length
    $125.00

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. It expands so you can just set it in your wrap groove and extend it to the ends for exact length cutting. Learn More
  9. Elephant Brown

    Leather wrap with two tone brown Elephant embossing. Because of the deep ridges this leather was spit to about 1mm thickness. Learn More
  10. Leather Wrap Template
    $45.00

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. Learn More
  11. Butterfly Butt Sleeves
    Starting at $20.00

    We now have the butterfly butt sleeves glued up and turned round. 
    Each shaft has three colors of veneers in them. They are turned to 1.375" and are over 4" long. These sleeves have over 20 layers of colored veneers glued up under tons of pressure and the layers alternate the three different colors all the way through the piece, so you have thin 1/16" stripes on two sides and nice butterfly points on the other two sides of the sleeve.

    The current in stock colors are:
    #1 Blue, gray and red.
    #2 Gray, olive and red.
    #3 Brown, gray and olive.

    All look very nice as they are subdued earth tones THEY ALSO MAKE GREAT COLORED BUTT RINGS! Learn More

  12. Ultra-Skin Tips

    Starting at: $9.95

    Laminated black pigskin tip. These tips hold chalk and grip the cue ball better than most laminated tips. Available in Pro Soft, Soft, Medium and Hard. 14mm Mix and match for discount! Learn More
  13. Moori

    Starting at: $15.00

    Laminated pigskin tip made in Japan. The original multi layered tip. Available in Soft, Medium and Quick/Hard. 14mm Learn More
  14. Gear Motor For Finishing
    $195.00

    This is a variable speed slow rotating gear motor to hook up to your Cue Smith lathe to apply finish like the Cue Cote or other finishes that need to the cue to slow rotate while curing. Learn More
  15. Poolrooms to Pulpits to Poolrooms DVD Click link to watch it for free
    $5.00

    The Poolrooms to Pulpits to Poolrooms DVD contains testimony of God's life changing power. Chris shared his testimony on local NTM Television Station live and this is a recording of that Broadcast. Click link to watch it for free https://youtu.be/GFZjY01qsDU or https://www.youtube.com/watch?v=GFZjY01qsDU&feature=youtu.be

    Learn More
  16. Carbide Thread Milling Bit 1/4” shank
    $99.95

    Carbide Thread Milling Internal Bit 1/4"” shank Cuts external threads from 14 threads per inch and finer up to 1.800" long. Cuts internal threads from 10 threads per inch and finer up to 1.800" deep. Minimum drilled hole bore of 1/4" required for internal threading. Learn More
  17. Carbide Inlay Cutting Bits .055” Pack of Five

    Carbide Inlay Cutting Bits .055”
    Pack of 5 starting at $4 per bit Learn More
  18. Carbide Inlay Cutting Bits .035” Pack of five

    Carbide Inlay Cutting Bits .035”
    Pack of 5 starting at $4 per bit Learn More
  19. Internet Special #3 Inlay Material
    $65.00

    5 Slabs of Bocote, 5 Slabs of Cocobolo and 5 slabs of Zebrawood. These are smooth cut slabs that are 1.5" x 9" and about 3/16" thick. They are ready to use for inlays or glue up for butterflies. Learn More
  20. specials
    Starting at $185.00

    Internet Special #1
    **Jump Start 6 pack special!**
    1- Bocote 30” x 1.375” butt dowel
    1- Purple Heart 30” x 1.375” butt dowel
    1- Ziricote 28”+ partially tapered butt
    1- Bocote 18” x 1.375” dowel
    1- Ebony forearm 18” x 1.200” doweled
    1- Ebony butt sleeve 3.75” x 1.375” dowel
    1- Medium Rosewood 18” x 1.375” dowel
    3- Maple Handles 18” x 1.375” dowels
    ONLY $185 (save $$)

    Add 6 #1 mix shaft dowels for $65 more =$250 (Save $$)
    This is all the wood needed for 6 complete cues!

    **Most of this exotic wood came from closed cue factories and the wood
    has been in it's present state for several years. You can't ask for
    more stable wood to give you a Jump Start building your cues.**

    Makes a great starter kit for the beginning cue maker or a great addition to the
    inventory of any cue shop! There is no limit on how many you can buy, so stock up!
    This wood is all carefully kiln dried.

    No Substitutions!

    The above pieces can be purchased individually on our Wood Shop page.

    USA ORDERS ONLY! Learn More
  21. Full Splice Butt Blanks - Black Ebony into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  22. Full Splice Butt Blanks - Coco-Bolo into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  23. Full Splice Butt Blanks - Shedua into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  24. Full Splice Butt Blanks - Rosewood into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  25. Full Splice Butt Blanks - Purple Heart into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  26. Full Splice Butt Blanks - Bocote into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  27. Tiger Tips Medium

    Medium USA made laminated pigskin tip that makes a great laminated alternative to the Le Pro and other medium hard tips. 14mm

    Softer USA made laminated cow hide tip. A great laminated alternative to the Elk Master and other soft tips. Holds shape better than non-layered soft tips. 14mm Learn More
  28. Walking Cane Lathe
    $1,995.00

    This lathe is specifically designed to build walking canes. However it could be used for turning other wood projects also. It comes with the larger 1.4" spindle bore headstock with 3/4HP variable speed motor and a steady rest with 1.4" chuck mounted on it just like the headstock has Learn More
  29. Kamui Black Tips

    Starting at: $22.75

    Out of stock

    Laminated pigskin tip made in Japan. Many are now proclaiming this to be the best tip in the world. Available in Super Soft, Soft and Medium. 14mm Learn More
  30. Martin Style Joint Pins, 3/8-10 Titanium

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  31. Martin Style Joint Pins, 3/8-10 Black G-10 Epoxy

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  32. Martin Style Joint Pins, 3/8-10 Brass

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  33. Joint Pins, Martin Style 3/8-10

    Starting at: $6.00

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order*

    Learn More
  34. Martin Style Joint Pins, 3/8-10 Aluminum

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  35. Martin Style Joint Pins, 3/8-10 Stainless Steel

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  36. Pattern 15

    Out of stock

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  37. Pattern 14

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  38. Inlay Pattern #13 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  39. Inlay Pattern #12 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  40. Inlay Pattern #11 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  41. Inlay Pattern #10 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  42. Inlay Pattern #9 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  43. Inlay Pattern #8 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  44. Inlay Pattern #7 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  45. Inlay Pattern #6 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  46. Inlay Pattern #5 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  47. Inlay Pattern #4 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  48. Inlay Pattern #3 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  49. Inlay Pattern #2 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  50. Inlay Pattern #1 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  51. Cue Smith Inlay Machine
    Starting at $1,895.00

    What is the CUE SMITH INLAY MACHINE and how does it work? In technical terms it is a Three Axis Linear Motion Manual Pantomill with .001" micro adjustments. It has the ability to cut out the part from your inlay material (Ivory, Abalone, Wood, Silver, Gold, Mother-of Pearl, Plastic, etc...) then cut the pocket out of the cue to accept the part. You can also make patterns with this machine. Learn More
  52. Micro Cue Smith III™ Cue Lathe
    $1,195.00

    This is our most portable Lathe. It uses the same headstock, chuck, tailstock,and cross-slide as our Mid Size Cue Smith lathe yet is super portable. At only 36" it is very compact, and the basic unit weighs under 30 pounds, so you can take it anywhere to do on the spot cue repairs. This is all the lathe you need for tips and ferrules on two-piece cues, but that is about all it is designed to do with the lightweight motor. Learn More
  53. Micro Cue Smith II™ Cue Lathe
    $1,395.00

    This is the modern version of the original in highly portable cue lathes. It uses the same high quality parts as the Mid-Size Cue Smith, yet it is only 36" long and the main lathe weighs less than 40 pounds. Learn More
  54. Mid Size Cue Smith Lathe with sliding Headstock
    Starting at $1,450.00

    This lathe is only slightly less portable than the MICRO CUE SMITH II and weighs in at just over 40 pounds and is only 48 inches long. There are no Bed Extensions to hassle with even when doing house cues. It does Tips, Ferrules, Shaft Reconditioning, Joint Work, House Cues, Wraps and could build a cue with the right options added.

     

    Our most popular Repair Lathe!

    Learn More
  55. Deluxe Cue Smith™ Cue Lathe
    Starting at $1,995.00

    This is the machine for the serious cue maker! This shows the Deluxe Cue Smith headstock with both chucks, the larger handwheel, and larger tailstock. You can use the steady rest behind or in front of the headstock. The headstock has 24 position indexing for cutting points, slots or inlays.

    Deluxe Cue Smith (base price) $1995.00

    Additional options below included in packages one and two:

    Aluminum Storage Cabinet with 25% more storage space than the older wood cabinet $275
    Taper Attachments $495.00
    Vertical Router, Spur Driver and Bit $200.00
    Power Feed (Handwheel replacement type) $175.00
    Rear Chuck $100.00

    Choice of 1/2 HP or 3/4 HP Variable Speed DC Motor included.

    60 Degree Live Center $35.00
    Sealer, Cleaner, Wax $26.00
    Extra steady rest $95.00

    Plus boring bar $8, cut off tool $8 and an extra two-way tool post $12)
    Regular Price $3444.00
    Package #1 Special price (Total Savings $249) $3195.00

    Package #2 comes with heavier duty leadscrew Power Feed and all other options in package #1
    Regular price $3769.00
    Package #2 Special price (Total Savings $274) $3495.00
    See our SPECIALS page for more savings and see below for more options.

     

    Additional Options:

    The above Package One Deluxe without Aluminum Storage Cabinet $3045

    The above Package Two Deluxe without Aluminum Storage Cabinet $3345

    Either package comes with your choice of 1/2 HP DC Variable speed motor on sliding headstock or Stationary Headstock with 3/4 HP DC variable speed motor

    The 3/4 HP motor is strong enough for coring, but eliminates the ability to taper one piece cues with your router

    Unless you want to build 1 piece cues we strongly suggest the 3/4HP motor.

    Removable Shaft Bar $50 (Allows you to remove your shaft bar and keep the settings)

    Additional Shaft Bars $150 (Allows you to set up different bars for different tapers)

    Additional Router brackets for multi-position mounting $50

    Additional #2 Morse Taper Tailstock $210

    Thread Milling Attachment for Package 2 $450

     

     

    Learn More
  56. Phenolic Inserts

    1.25" long, .510" outside diameter alignment shoulder with 1/2" of 1/2 x 20 thread and
    .230" inside diameter. This allows you to bore and tap any 5/16" or 3/8" thread
    *Use our Miniature Boring Bar to install phenolic insert and the Joint Pin Screws below.*

    Learn More
  57. Colored Veneers
    Starting at $4.00

    Dyed Colored Veneers.

    #1 Brilliant Red
    #2 Royal Blue
    #3 Light Green
    #4 Black
    #5 Burnt Orange
    #6 Deep Purple

    All veneers are cut approximately 1/32" thick.
    The sheets are approximately 5.5" wide and 10.5" long.

    NOTE: You can get about four 1.25" point strips out of each.

    Learn More
  58. Economy Inlaid Butt Sleeves
    Starting at $25.00

    Six CNC inlaid butt sleeves. See Below:

    #1 Black sleeve with 8 imitation ivory diamonds.

    #2 Imitation ivory sleeve with 8 black diamonds

    #3 Black sleeve with 4imitation ivory ovals and 4 diamonds

    #4 Imitation ivory sleeve with 3 black ovals and 3 diamonds

    #5 Black sleeve with 6 imitation ivory fancy shapes

    #6 Imitation ivory sleeve with 6 black fancy shapes

    All 6 butt sleeves have a butt plate glued on and bored to 7/8" which makes them

    very easy to install. The sleeves and inlay material is similar to PVC or ABS.


    SPECIAL: Take one of each for only $20 each. (Total $120 per set)

    Learn More
  59. 10 Mixed Ferrules
    $35.00

    10 Mixed Ferrules (various kinds of threaded and non threaded) Be prepared for any repair. Learn More
  60. High Action- Low Deflection Ferrules.. Replacements for Meucci and more!
    Starting at $4.00

    This is the material to use to replace Meucci ferrules or use on your custom cues.
    Gives higher action lower deflection hit and is available in 1" or 1.250" length. Threaded

    Discounts for Quantity Learn More
  61. Elk Master Tips (10 Tips)
    $8.00

    This is the tip for those who want a softer hit. 14mm Learn More
  62. Le-Professional / Le-Pro - (10 Tips)
    $8.00

    The worlds most popular tip. Gives a medium hard hit. 14mm Learn More
  63. Pigskin Pro Tips (10 Tips)
    $30.00

    Laminated pigskin gives a medium hit. One of the best layered tips on the market for the money. 14mm Learn More
  64. Razorback Tips

    Laminated pigskin gives a medium to medium hard hit. Over 20 layers of very high quality pigskin leather. Many like it as well as the Moori. 14mm Learn More
  65. Wizard Tips

    Laminated pigskin tip that is very often compared to the Moori. Available in Medium and Hard. 14mm Learn More
  66. Tiger Tips Soft

    Medium USA made laminated pigskin tip that makes a great laminated alternative to the Le Pro and other medium hard tips. 14mm

    Softer USA made laminated cow hide tip. A great laminated alternative to the Elk Master and other soft tips. Holds shape better than non-layered soft tips. 14mm Learn More
  67. Everest Tips

    Medium USA made laminated pigskin tip is very often compared to the Moori. Many like it better. 14mm Learn More
  68. Mad Man Leather Jump/Break Tips

    A USA made single layer rock hard cow hide tip. They jump easily and yet still give plenty of control on the break. Legal in all leagues. They hold glue well and are the best leather jump/break tip we have seen. 14mm Learn More
  69. Shaft Cleaner
    Starting at $8.00

    Made to use on your lathe to clean the chalk and dirt out of the shaft. Learn More
  70. A Practice Leather Blank

    Leather blank for practicing. These all have holes or pattern blemishes. Our choice of color. Learn More
  71. A Leather Wrap Fixture
    Starting at $195.00

    Cue Smith Leather Wrap Fixture
    For Cue Smith Lathes

    Includes:

    • Mounted Seaming guide
    • Wrap length and end radius template
    • 5 mixed leather wraps (our choice)
    • Length measuring sliding ruler
    • Foam glue applicators and razor blades
    • Instruction DVD

    The Cue Smith Leather Wrap Fixture is designed to work only on the Cue Smith Lathes with indexing headstocks.

    The Cue Smith Leather Wrap Fixture makes leather installation a breeze with a little practice.

    Our Deluxe Wrap Fixture comes with the Adjustable Length Leather Template instead of Standard Template and Ruler! Learn More
  72. Mother of Pearl Colored Inlay Slabs
    Starting at $10.00

    Mother of Pearl Colored manufactured Inlay Slabs Learn More
  73. Camel Bone Ivory

    This is the best natural substitute for Elephant Ivory that I have seen. It machines just like Elephant Ivory and has a off white cast to it like Elephant ivory. Unlike the Elephant the Camel is not endangered. The slabs are approximately 8" long by 7/8" wide and 3/16" thick. Great for points and inlays.

    Picture of Camel Bone inlaid cue below:

    Learn More
  74. Jeweler's Saw and 1/4" Arbor
    Starting at $35.00

    Jewelers Saw and 1/4" arbor for parting off joint rings with router. Learn More
  75. A Tip Shaping Guide & Blade Rest
    $30.00

    This is a shaping guide for those who prefer to use the utility blade to hand shape the tip.

    It has 3 radius guides on the rest. Nickel, Penny and Dime size radiuses.

    This takes the guess work out of it and mounts on one side of your tool post.

    Learn More
  76. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, two carbide thread mill bits, and your choice of one thread gear/ belt set: $575 on Deluxe package #1 and $450 on Deluxe package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one exteral threading bits) $50 each.

    Learn More
  77. Butterfly and Full Splice Jig
    $40.00

    For band saws and table saws (cuts angles and prongs in turning squares). Cuts the flat taper angle on a turning square for gluing your butterfly pieces to on a table saw or band saw. Also allows you to cut the v-prongs in the turning square handle part of a full splice cue on a band saw. Learn More
  78. Live Center - Off-setting for cutting tapers 3/8" shank
    $85.00

    Off-setting live center for cutting tapers or point grooves 3/8" straight shank smaller unit. Learn More
  79. Live Center - Off-Setting  #2 or #3 Morse Taper
    $150.00

    Off-Setting Live Center for cutting tapers and point grooves #2 or #3 Morse Taper Learn More
  80. The Cue Building Book: From Tree, To Tip, To Trade Show! Fifth Edition.
    Starting at $75.00

    By: Chris Hightower

    This is the most extensive book on cue building written to date. As the title suggests, it takes you through the complete cue building process from the sawmill, to the finished cue, to marketing your cues. It covers many things that the videos don’t. However, it is said that a picture is worth a thousand words. It covers doing work on wood lathes, metal lathes, and of course, cue lathes. It shows the table saw tapering machine, how to build your own spray booth, kiln, wood stabilizer dipping tank, collets, linen presses, inlay patterns and much more. It shows how to put on the finish with and without spraying, Irish linen and leather wraps, V-groove and butterfly points, inlays and much more.

    There is an "Advice from the Masters" chapter that gives advice to beginners from some of America’s most well known cue makers who have been building cues for decades. There is also a brief history on cue building in the USA. There is a suppliers list showing where to buy almost everything you need to build cues from shaft wood, to exotic woods and veneers, cue parts, manual and CNC machinery and small tooling. The book has nearly two hundred drawings, showing how to do the various operations and how to make the special jigs.

    It is a wealth of information contained in a format that is easy to read and refer back to. There is a section for your own notes in the back. Every beginner to intermediate cue maker should have this book and the advanced cue maker might still pick up some little tricks.

    Over 260 pages! FIFTH EDITION!

    ***INTERNET SPECIALS***
    The Cue Building Book and Any Two DVDs Only $150 Save $25 OR
    The Cue Building Book and Any Three DVDs Only $195 Save $30 OR
    The Cue Building Book and All Four DVDs Only $240 Save $35

    Learn More
  81. Toolpost - Quick Change Toolpost System
    Starting at $135.00

    Quick Change Toolpost with 4 tool holders (Two square tool holders, one cut off blade holder and one 3/8" boring bar holder). Learn More
  82. Bed Extension
    Starting at $125.00

    Bed extension for any Cue Smith Lathe, will snap on and off either end of the lathe. Use with house steady rest for doing one piece cues! Learn More

Grid List

Set Ascending Direction

82 Item(s)