Makers of precision Cue Smith™ brand cue lathes and inlay machine!

Search results for 'foot controll for wrap'

Grid List

Set Ascending Direction

1-200 of 204

Page:
  1. 1
  2. 2
  1. Brass Gear for leadscrew
    Starting at $35.00

    Brass Gear (For use with Handwheel and Power Feed) Available with or without housing and stem. Learn More
  2. Lizard Turquoise

    Leather wrap with Turquoise lizard embossing. Learn More
  3. Western Brown Floral

    Cow Hide leather wrap with Western Brown Floral.embossing Learn More
  4. Elephant Black Texture

    Leather wrap with black Elephant embossing. Learn More
  5. Pebble Textured Black

    Leather wrap with Textured Black Pebble embossing. Learn More
  6. Tool Bits Cut Off

    Extra 1/4" tool bits .

    • Cut Off Tool Bit
    • This bit is used for parting off material like rings and ferrule material. Learn More
  7. Tool Bits Boring Bar

    Extra 1/4" tool bits.

    • Boring Bar tool bit
    • For boring inside diameter holes from 1/2" and larger Learn More
  8. Tool Bits Round Nose

    Extra 1/4" tool bits.

    • Round Nose Tool Bit
    • For turning smoother cuts on ferrules and rings in both directions. Learn More
  9. Right and Left Hand Bits

    Extra 1/4" tool bits.

    • Standard Right or Left Hand
    • This bit is ground so it can be used as a right hand or left hand bit. A right hand bit is used for facing and cutting tenons and cuts from right to left. A left hand bit cuts from left to right. Learn More
  10. leather wrap black textured

    Leather wrap black textured with gloss finish. Learn More
  11. Lizard Creamy White

    Leather wrap with creamy white lizard embossing. Learn More
  12. Longer Cork Wrap

    Longer Cork cue wrap. approximately 18" long Learn More
  13. Tuxedo Black and White

    Calf skin leather wrap with Tuxedo Black and White embossing Learn More
  14. Cue Smith Tapering Machine
    Starting at $2,795.00

    This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, leadscrew power feed, butt and shaft taper bars, ER Collet headstock with dead center / spur driver and a 1/2" drill chuck on the tailstock with 60 degree live center and vertical router as well as an auto stop.. It takes up very little room at 4 feet long. This is the perfect machine to do your butt and shaft tapering to keep your other lathes free for other aspects of cue building. The speed range is fast enough to use for sanding and can be slowed down to a crawl for shaft tapering or finishing cues..The Basic Package one unit internet special is $2795. Package two comes with everything in package one plus removable shaft bar $50, Point Taper Bar $35, one additional shaft bar $150 and a small 60 degree live center for turning shafts $30. Only $2995 Save $65 Learn More
  15. Python Brown

    Lamb skin leather wrap with brown python embossing. Learn More
  16. Lizard Belly Golden Brown

    Leather wrap with golden brown lizard belly embossing. Learn More
  17. Goncalo Alves 24" x 1.5" Turning Square
    $15.00

    Goncalo Alves 124" x 1.5" Turning Square Great for full slice handles and much more. Learn More
  18. Buckeye Burl Wood Turning Squares for butt sleeves and handles.
    $35.00

    Buckeye Burl wood inlay slab.
    1-1/2" x 1-1/2" x 4" Colors vary from beautiful grayish blue to cream and often mixed color. Nice for making butt sleeves or segmented handles. Will match colors for 2 or 3 piece handles. Custom sizes available. Email us with your needs. Learn More
  19. Buckeye Burl Wood Inlay Slab
    $10.00

    Buckeye Burl wood inlay slab.
    3/16" x 1-1/2" x 5" Colors vary from beautiful grayish blue to cream and often mixed color. Nice for inlays or knife scales. Custom sizes available. Email us with your needs. Learn More
  20. Pebble Textured Silver

    Leather wrap with Textured Silver Pebble embossing. Learn More
  21. Ostrich Red

    Leather wrap with red ostrich embossing. Learn More
  22. leather wrap smooth black

    Leather wrap smooth black in longer 18" length Normal lengths wraps are 13.5". Learn More
  23. Jet Black Linen Phenolic Tube (Wrap-Joint Size)
    $15.00

    Jet Black Linen Phenolic Tube (Wrap-Joint Size) 6" long Approximately 1.125" OD x 15mm ID x 6" long. This is the highest quality material we can find. Learn More
  24. Leopard Suede

    Suede leather wrap with Leopard print.. Learn More
  25. Caiman Gray

    Leather wrap with gray Caiman dimple embossing. Learn More
  26. leather wrap black boar

    Leather wrap boar black in 18 inches length. Normal wraps are 13.5 inches long. Learn More
  27. Western Saddleback Floral

    Cow Hide leather wrap with Western Saddleback Floral.embossing Learn More
  28. leather wrap black gator

    Leather wrap with black gator embossing in 18 inch length. Normal wraps are 13.5 inches. Learn More
  29. leather wrap black textured

    Leather wrap black textured in 18" long length. Normal wraps are 13.5" Learn More
  30. Smooth Tiger Stripe

    Leather wrap smooth brown and tan tiger stripe Learn More
  31. Python Red Belly

    Pig skin leather wrap with red belly Python.embossing Learn More
  32. Python Red

    Pig skin leather wrap with red Python.embossing Learn More
  33. Caiman Dark Blue

    Leather wrap with dark blue Caiman dimple embossing. Learn More
  34. Caiman Black

    Leather wrap with black Caiman dimple embossing. Learn More
  35. Textured Red Jasper Two Tone

    Leather wrap with red two tone embossing. Learn More
  36. White Diamond Jump Break Tip

    Picone White Diamond tips are a multi-layered tip. Made from a specially selected fiber, they go through an 11 step process before becoming a finished tip. Each tip is inspected before packaging to the insure you the highest quality. 14mm Learn More
  37. The Road Bridge
    $95.00

    Out of stock

    The Road Bridge is a telescoping portable bridge with a very unique bridge head design that also pivots to any position. It allows you to shoot center, ball as well as top and bottom spin. The tall design also allows you to shoot over multiple balls that normal bridges will not reach. You can rest your hand on it for super jump shots or masse shots. You can also use it for jump shots in the middle of the table. Learn More
  38. Lizard Red

    Leather wrap with red lizard embossing. Learn More
  39. A Leather Wrap Template Adjustable Length
    $125.00

    Out of stock

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. It expands so you can just set it in your wrap groove and extend it to the ends for exact length cutting. Learn More
  40. Elephant Brown Texture

    Leather wrap with two tone brown Elephant embossing. Because of the deep ridges this leather was spit to about 1mm thickness. Learn More
  41. House Cue Ferrules 3/4"

    These ferrules are made for house cues and are 3/4 inch long and have a 5/16" hole going all the way through them. Learn More
  42. Leather Wrap Template
    $45.00

    Out of stock

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. Learn More
  43. Textured Pink

    Leather wrap pink textured. Learn More
  44. Ostrich Medium Brown

    Leather wrap with medium brown ostrich embossing. Learn More
  45. Ostrich black low dimple

    Leather wrap with black ostrich lower dimple embossing. Learn More
  46. Smooth White

    Leather wrap smooth creamy white. Learn More
  47. Smooth Medium Brown

    Leather wrap smooth medium brown. Learn More
  48. Smooth Blue

    Leather wrap smooth blue. Learn More
  49. Snake Black

    Leather wrap with black snake embossing. Learn More
  50. Snake Blue

    Leather wrap with blue snake embossing. Learn More
  51. Smooth Burgundy

    Leather wrap smooth burgundy. Learn More
  52. Crocodile Wine

    Out of stock

    Leather wrap with wine crocodile embossing. Learn More
  53. Crocodile Brown

    Leather wrap with brown crocodile embossing. Learn More
  54. Lizard Bronze

    Leather wrap with bronze lizard embossing. Learn More
  55. Tan Caiman

    Leather wrap with tan Caiman embossing. Learn More
  56. Ultra-Skin Tips

    Starting at: $9.95

    Laminated black pigskin tip. These tips hold chalk and grip the cue ball better than most laminated tips. Available in Pro Soft, Soft, Medium and Hard. 14mm Mix and match for discount! Learn More
  57. Snake Tan

    Leather wrap with tan snake embossing. Learn More
  58. Snake Tiger

    Out of stock

    Leather wrap with tiger snake embossing Learn More
  59. Python Green

    Lamb skin leather wrap with green python.embossing Learn More
  60. Textured Light Blue

    Leather wrap light blue textured. Learn More
  61. Textured Orange

    Leather wrap orange textured. Learn More
  62. Textured Purple

    Leather wrap purple textured. Learn More
  63. Gator Red

    Leather wrap with red gator embossing. Learn More
  64. Gear Motor For Finishing
    $195.00

    This is a variable speed slow rotating gear motor to hook up to your Cue Smith lathe to apply finish like the Cue Cote or other finishes that need to the cue to slow rotate while curing. Learn More
  65. Poolrooms to Pulpits to Poolrooms DVD Click link to watch it for free
    $5.00

    Out of stock

    The Poolrooms to Pulpits to Poolrooms DVD contains testimony of God's life changing power. Chris shared his testimony on local NTM Television Station live and this is a recording of that Broadcast. Click link to watch it for free https://youtu.be/GFZjY01qsDU or https://www.youtube.com/watch?v=GFZjY01qsDU&feature=youtu.be

    Learn More
  66. Point taper bar for butt sleeve  5 Inch
    $25.00

    Point taper bar for butt sleeve 5 Inch Learn More
  67. Carbide Thread Milling Bit 1/4” shank
    $99.95

    Carbide Thread Milling Internal Bit 1/4"” shank Cuts external threads from 14 threads per inch and finer up to 1.800" long. Cuts internal threads from 10 threads per inch and finer up to 1.800" deep. Minimum drilled hole bore of 1/4" required for internal threading. Learn More
  68. Cork Wrap

    Cork cue wrap. Learn More
  69. ebony
    Starting at $35.00

    Ebony Jump Start Wood

    18” x 1.200” dowel forearm or

    3.75” x 1.375” round butt sleeve

    Learn More
  70. Internet Special #3 Inlay Material
    $65.00

    5 Slabs of Bocote, 5 Slabs of Cocobolo and 5 slabs of Zebrawood. These are smooth cut slabs that are 1.5" x 9" and about 3/16" thick. They are ready to use for inlays or glue up for butterflies. Learn More
  71. Internet Special #4 Free Inlay Pattern
    $3,095.00

    Purchase the Deluxe Cue Smith Cue Builders Special for $3195 or $3495 and the Self Contained Inlay Machine for $1895 and get any one extra in stock Inlay Pattern for free.
    A $100 Savings.

    Learn More
  72. Internet Special #2 Complete Tapered Cue Kit
    $95.00

    1- Ziricote 28”+ completely tapered butt
    1- #1.5 Final sanding size shaft blank
    1- Butt plate
    2- Joint Rings
    1- 3/8-10 Joint pin.
    1- Ferrule
    1- Le-ProTip
    1- Rubber Bumper
    ONLY $95

    For assembly instructions we suggest the Basic Cue Building and Repair DVD $50

    Only requires minor machining, drilling and tapping.

    Perfect for those who have a lathe that does not have
    tapering capabilities.

    No Substitutions!

    Learn More
  73. specials
    Starting at $185.00

    Internet Special #1
    **Jump Start 6 pack special!**
    1- Bocote 30” x 1.375” butt dowel
    1- Purple Heart 30” x 1.375” butt dowel
    1- Ziricote 28”+ partially tapered butt
    1- Bocote 18” x 1.375” dowel
    1- Ebony forearm 18” x 1.200” doweled
    1- Ebony butt sleeve 3.75” x 1.375” dowel
    1- Medium Rosewood 18” x 1.375” dowel
    3- Maple Handles 18” x 1.375” dowels
    ONLY $185 (save $$)

    Add 6 #1 mix shaft dowels for $65 more =$250 (Save $$)
    This is all the wood needed for 6 complete cues!

    **Most of this exotic wood came from closed cue factories and the wood
    has been in it's present state for several years. You can't ask for
    more stable wood to give you a Jump Start building your cues.**

    Makes a great starter kit for the beginning cue maker or a great addition to the
    inventory of any cue shop! There is no limit on how many you can buy, so stock up!
    This wood is all carefully kiln dried.

    No Substitutions!

    The above pieces can be purchased individually on our Wood Shop page.

    USA ORDERS ONLY! Learn More
  74. stainless joint pin screws for cues

    Starting at: $4.50

    Stainless Joint Pin Screws

    Mix and match for discount!

    Learn More
  75. Rubber Bumpers

    Starting at: $2.00

    Rubber Bumpers

    Mix and match for discount!

    Learn More
  76. Walking Cane Lathe
    $1,995.00

    This lathe is specifically designed to build walking canes. However it could be used for turning other wood projects also. It comes with the larger 1.4" spindle bore headstock with 3/4HP variable speed motor and a steady rest with 1.4" chuck mounted on it just like the headstock has Learn More
  77. Martin Style Joint Pins, 3/8-10 Titanium

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  78. Martin Style Joint Pins, 3/8-10 Black G-10 Epoxy

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  79. Martin Style Joint Pins, 3/8-10 Brass

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  80. Joint Pins, Martin Style 3/8-10

    Starting at: $6.00

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order*

    Learn More
  81. Martin Style Joint Pins, 3/8-10 Aluminum

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  82. Martin Style Joint Pins, 3/8-10 Stainless Steel

    Has flat minor diameter for precise locating of shaft.
    Installs with normal 3/8-10 tap.
    *3/8-11 available on special order* Learn More
  83. Pattern 15

    Out of stock

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  84. Pattern 14

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  85. Inlay Pattern #13 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  86. Inlay Pattern #12 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  87. Inlay Pattern #11 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  88. Inlay Pattern #10 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  89. Inlay Pattern #9 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  90. Inlay Pattern #8 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  91. Inlay Pattern #7 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  92. Inlay Pattern #6 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  93. Inlay Pattern #5 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  94. Inlay Pattern #4 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  95. Inlay Pattern #3 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  96. Inlay Pattern #2 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  97. Inlay Pattern #1 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  98. Cue Smith Inlay Machine
    Starting at $1,895.00

    What is the CUE SMITH INLAY MACHINE and how does it work? In technical terms it is a Three Axis Linear Motion Manual Pantomill with .001" micro adjustments. It has the ability to cut out the part from your inlay material (Ivory, Abalone, Wood, Silver, Gold, Mother-of Pearl, Plastic, etc...) then cut the pocket out of the cue to accept the part. You can also make patterns with this machine. Learn More
  99. Cue Finishing and Wrapping Lathe
    Starting at $795.00

    This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, a three jaw chuck on the headstock and a 1/2” chuck on the tailstock. It is very portable and under 30 pounds and 4 feet long. This is the perfect second function lathe for shop or tournament work. You can do shaft cleaning, reconditioning, sanding or butt sanding and finishing on it with some accessories. The speed range is from about 200 to 2000 rpm. You can add a foot control for wrapping. Learn More
  100. Micro Cue Smith III™ Cue Lathe
    $1,195.00

    This is our most portable Lathe. It uses the same headstock, chuck, tailstock,and cross-slide as our Mid Size Cue Smith lathe yet is super portable. At only 36" it is very compact, and the basic unit weighs under 30 pounds, so you can take it anywhere to do on the spot cue repairs. This is all the lathe you need for tips and ferrules on two-piece cues, but that is about all it is designed to do with the lightweight motor. Learn More
  101. Micro Cue Smith II™ Cue Lathe
    $1,395.00

    This is the modern version of the original in highly portable cue lathes. It uses the same high quality parts as the Mid-Size Cue Smith, yet it is only 36" long and the main lathe weighs less than 40 pounds. Learn More
  102. Mid Size Cue Smith Lathe with sliding Headstock
    Starting at $1,450.00

    This lathe is only slightly less portable than the MICRO CUE SMITH II and weighs in at just over 40 pounds and is only 48 inches long. There are no Bed Extensions to hassle with even when doing house cues. It does Tips, Ferrules, Shaft Reconditioning, Joint Work, House Cues, Wraps and could build a cue with the right options added.

     

    Our most popular Repair Lathe!

    Learn More
  103. Deluxe Cue Smith™ Cue Lathe
    Starting at $1,995.00

    This is the machine for the serious cue maker! This shows the Deluxe Cue Smith headstock with both chucks, the larger handwheel, and larger tailstock. You can use the steady rest behind or in front of the headstock. The headstock has 24 position indexing for cutting points, slots or inlays.

    Deluxe Cue Smith (base price) $1995.00

    The Basic unit includes one chuck on headstock, indexing lathe, offsetting tailstock, variable speed motor, house cue/joint work steady rest with collets, wrap foot control, 3 lathe pins, concaved live center, drill chuck, DVD and two 8 oz Cleaners & a Cue Wax!

    Additional options below included in Cue Building packages one and two:

    Package #1 includes Aluminum Storage Cabinet with more storage space than the discontinued wood cabinet $275
    Taper Attachments $595.00
    Vertical Router, Spur Driver and Bit $200.00
    Power Feed (Handwheel replacement type) $175.00
    Rear Chuck $100.00

    Choice of 1/2 HP or 3/4 HP Variable Speed DC Motor included.

    60 Degree Live Center $35.00
    two 8 ounce Shaft Cleaner, Cue Wax
    Extra steady rest $95.00

    Plus boring bar $8, cut off tool $8 and an extra two-way tool post $12)
    Regular Price $3498.00
    Package #1 Special price (Total Savings $203) $3295.00

    Package #2 comes with heavier duty leadscrew Power Feed $550, instead of Hand Wheel replacement type and includes all other options in package #1
    Regular price $3873.00
    Package #2 Special price (Total Savings $278) $3595.00
    See our SPECIALS page for more savings and see below for more options.

     

    Additional Options:

    The above Package One Deluxe without Storage Cabinet $3145

    The above Package Two Deluxe without Storage Cabinet $3445

    Either package comes with your choice of 1/2 HP DC Variable speed motor on sliding headstock or Stationary Headstock with 3/4 HP DC variable speed motor

    The 3/4 HP motor is strong enough for coring, but eliminates the ability to taper one piece cues with your router

    Unless you want to build 1 piece cues we strongly suggest the 3/4HP motor.

    Removable Shaft Bar $50 (Allows you to remove your shaft bar and keep the settings)

    Additional Shaft Bars $150 (Allows you to set up different bars for different tapers)

    Additional Router brackets for multi-position mounting $50

    Additional #2 Morse Taper Tailstock $210

    Thread Milling Attachment for Package 2 $450

     

     

    Learn More
  104. Economy Inlaid Butt Sleeves
    Starting at $25.00

    Six CNC inlaid butt sleeves. See Below:

    #1 Black sleeve with 8 imitation ivory diamonds.

    #2 DISCONTINUED

    #3 Black sleeve with 4 imitation ivory ovals and 4 diamonds

    #4 Imitation ivory sleeve with 3 black ovals and 3 diamonds

    #5 Black sleeve with 6 imitation ivory propellers

    #6 Imitation ivory sleeve with 6 black propellers

    All 5 butt sleeves have a butt plate glued on and bored to 7/8" which makes them

    very easy to install. The sleeves and inlay material is similar to PVC or ABS. They can be polished to a shiny surface without any finish needed.


    SPECIAL: Take one of each for only $20 each. (Total $100 per set)

    Learn More
  105. 10 Mixed Ferrules
    $35.00

    10 Mixed Ferrules (various kinds of threaded and non threaded) Be prepared for any repair. Learn More
  106. Phenolic Ferrules
    Starting at $4.00

    Ferrules and Solid 1 inch or 1.250" long blanks for making any type ferrule desired.

    Discounts for quantity Learn More
  107. High Action- Low Deflection Ferrules.. Replacements for Meucci and more!
    Starting at $4.00

    This is the material to use to replace Meucci ferrules or use on your custom cues.
    Gives higher action lower deflection hit and is available in 1" or 1.250" length. Threaded

    Discounts for Quantity Learn More
  108. White Linen Based Ferrules
    Starting at $4.00

    Threaded, fine weave, white linen based ferrules. Gives a medium hard hit. Linen based Melamine.
    Available in 1" or 1.250" or 1 foot length.
    Threaded or unthreaded.

    Discounts for quantity Learn More
  109. Yellow Micarta Ferrules
    Starting at $4.00

    Yellow micarta ferrules.
    Strong Material that polishes nicely and machines easily. Gives a medium hard hit. USA Micarta.

    Available in 1 inch, 1.25 inch, or 1 foot, solid, or drilled and threaded. Quantity DIscounts. Learn More
  110. Elk Master Tips (10 Tips)
    $8.00

    This is the tip for those who want a softer hit. 14mm Learn More
  111. Pigskin Pro Tips (10 Tips)
    $30.00

    Laminated pigskin gives a medium hit. One of the best layered tips on the market for the money. 14mm Learn More
  112. High Power Phenolic Jump/Break Tips

    Canvas reinforced rock hard jump/break tip. Nothing jumps the ball easier or gives more power on the break.
    Check your league rules for legality. 14mm Learn More
  113. Basic Cue Building and Repair DVD
    $50.00

    By: Chris Hightower

    2.5 Hours (DVD or VHS)

    This video covers replacing tips, ferrules, wraps, shaft reconditioning, joint work, turning butts and shafts from scratch with and without taper attachments and more.

    All the work is done on our Cue Smith Lathes.

    This video comes with a $50 credit toward the purchase a Cue Smith Lathe!

    Learn More
  114. Cross Slide - Extra Top Slides
    $50.00

    Extra non-rotating extra top slides for machines with taper bars. Learn More
  115. A Practice Leather Blank

    Leather blank for practicing. These all have holes or pattern blemishes. Our choice of color. Learn More
  116. A Leather Wrap Fixture
    Starting at $195.00

    Out of stock

    Cue Smith Leather Wrap Fixture
    For Cue Smith Lathes

    Includes:

    • Mounted Seaming guide
    • Wrap length and end radius template
    • 5 mixed leather wraps (our choice)
    • Length measuring sliding ruler
    • Foam glue applicators and razor blades
    • Instruction DVD

    The Cue Smith Leather Wrap Fixture is designed to work only on the Cue Smith Lathes with indexing headstocks.

    The Cue Smith Leather Wrap Fixture makes leather installation a breeze with a little practice.

    Our Deluxe Wrap Fixture comes with the Adjustable Length Leather Template instead of Standard Template and Ruler! Learn More
  117. leather wrap wine snake

    Leather wrap with wine snake embossing. Learn More
  118. Snake Turquoise

    Leather wrap with turquoise snake embossing. Learn More
  119. Textured Red

    Leather wrap textured red. This leather has a very slight texture. It is almost smooth and has a gloss finish. Learn More
  120. leather wrap textured green

    Leather wrap textured green. Learn More
  121. leather wrap textured blue

    Leather wrap textured blue. Learn More
  122. leather wrap taupe ostrich

    Leather wrap with taupe ostrich embossing. Learn More
  123. Ostrich Tan

    Leather wrap with tan ostrich embossing. Learn More
  124. leather wrap tan gator

    Leather wrap with tan gator embossing. Learn More
  125. leather wrap smooth tan

    Leather wrap Boar tan. Learn More
  126. leather wrap smooth gray

    Leather wrap smooth gray. Learn More
  127. leather wrap smooth brown

    Leather wrap smooth dark brown. Learn More
  128. leather wrap smooth black

    Leather wrap smooth black. Learn More
  129. Python Black and White

    Leather wrap with black and white python embossing. Learn More
  130. leather wrap purple python

    Pig skin leather wrap with purple python embossing. Learn More
  131. leather wrap pink ostrich

    Leather wrap with pink ostrich embossing. Learn More
  132. leather wrap pink gator

    Leather wrap with pink gator embossing. Learn More
  133. leather wrap medium brown

    Leather wrap medium brown. Learn More
  134. leather wrap medium brown gator

    Leather wrap with medium brown gator embossing. Learn More
  135. leather wrap gray lizard

    Leather wrap with gray lizard embossing. Learn More
  136. leather wrap dark brown

    Leather wrap dark brown. Learn More
  137. leather wrap dark brown ostrich

    Leather wrap with dark brown ostrich embossing. Learn More
  138. leather wrap crazy pig

    Out of stock

    Leather wrap with crazy pig embossing. Learn More
  139. leather wrap butterscotch ostrich

    Out of stock

    Leather wrap with butterscotch ostrich embossing. Learn More
  140. leather wrap burgundy

    Leather wrap burgundy. Learn More
  141. leather wrap brown white gator

    Leather wrap with brown white gator embossing. Learn More
  142. leather wrap brown caiman

    Leather wrap with brown Caiman dimple embossing. Learn More
  143. leather wrap brown lizard

    Leather wrap with brown lizard embossing. Learn More
  144. leather wrap brown gator

    Leather wrap with dark brown gator embossing. Learn More
  145. leather wrap blue gator

    Out of stock

    Leather wrap with blue gator embossing. Learn More
  146. leather wrap black textured

    Leather wrap black textured. Learn More
  147. leather wrap black ostrich

    Leather wrap with black ostrich embossing. Learn More
  148. leather wrap black lizard

    Leather wrap with black gloss lizard embossing. Stiffer leather with very consistent thickness. Learn More
  149. leather wrap black gator

    Leather wrap with black gator embossing. Learn More
  150. leather wrap black boar

    Leather wrap boar black. Learn More
  151. Internet Special #5 Complete Black Buffalo Horn Kit
    Starting at $30.00

    Complete Black Buffalo Horn Kit
    Includes:
    1-Buffalo Butt Plate
    1-Buffalo Joint
    2-Buffalo Ferrules


    Add one 3/16" X 1.25" X 8" Buffalo slab for $10 Learn More
  152. Camel Bone Ivory

    This is the best natural substitute for Elephant Ivory that I have seen. It machines just like Elephant Ivory and has a off white cast to it like Elephant ivory. Unlike the Elephant the Camel is not endangered. The slabs are approximately 8" long by 7/8" wide and 3/16" thick. Great for points and inlays.

    Picture of Camel Bone inlaid cue below:

    Learn More
  153. Maple Coring Dowels 15" X 1"
    $4.00

    Maple Coring Dowels 15" X 1" (Turn them down to 3/4" or 5/8" for coring forearms) Learn More
  154. Shaft Wood #2 Mix Grade

    Wood hand selected and graded for custom cues!
    1" X 30" Hard Rock Maple Shaft Dowels
    #2 Mix Yields Approximately
    20% #1 or AAA Grade
    60 % #1.5 & #2 or A+ to B Grades
    20% #3 or C Grade
    Learn More
  155. Shaft Wood #1 Mix Grade

    Wood hand selected and graded for custom cues!

    1" X 30" Hard Rock Maple Shaft Dowels or White Ash Shaft Dowels

    #1 Mix Yields Approximately
    50% #1 or AAA Grade
    40% #1.5 & #2 or A+ to B Grades
    10% #3 or C Grade

    Learn More
  156. Steady Rest for Metal Lathe
    $150.00

    Mounted just on the bearing so you can mount it in your metal lathe steady rest or on your wood lathe. Learn More
  157. Collet 1/8"
    $10.00

    For using 1/8" end mills in 1/4" router for cutting stitch rings. Learn More
  158. Router Bit - Six Wing Cutter 1.25"
    $59.00

    1.25" diameter 6 Wing Cutter with 1/4" shank
    (Use for ultra smooth finish passes on shafts.)

    Learn More
  159. Jeweler's Saw and 1/4" Arbor
    Starting at $35.00

    Jewelers Saw and 1/4" arbor for parting off joint rings with router. Learn More
  160. Router Bit - Vertical V Bit 1"
    $55.00

    Vertical V Bit 1" (inch) For cutting Point Grooves Learn More
  161. Router Bit - Vertical V Bit 5/8"
    $45.00

    Vertical V Bit 5/8" for cutting point grooves Learn More
  162. Router Bit - Straight 3/4" Bit
    $20.00

    Straight 3/4" Bit for tapering cues and more Learn More
  163. Router Bit - Horizontal V-Bit 3/4"
    $35.00

    Horizontal V Bit 3/4" Learn More
  164. A Tip Shaping Guide & Blade Rest
    $30.00

    Out of stock

    This is a shaping guide for those who prefer to use the utility blade to hand shape the tip.

    It has 3 radius guides on the rest. Nickel, Penny and Dime size radiuses.

    This takes the guess work out of it and mounts on one side of your tool post.

    Learn More
  165. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, two carbide thread mill bits, and your choice of one thread gear/ belt set: $575 on Deluxe package #1 and $450 on Deluxe package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one exteral threading bits) $50 each.

    Learn More
  166. Veneer Fixture
    $75.00

    Veneer Fixture for cutting 45 degree angles on your veneers. (Requires router table or overhead router like shown in Advanced Volume One DVD plus 5/8 or one inch vertical v-bit). Can also be used on a table saw with blade set at 45 degrees) Learn More
  167. Butterfly and Full Splice Jig
    $40.00

    For band saws and table saws (cuts angles and prongs in turning squares). Cuts the flat taper angle on a turning square for gluing your butterfly pieces to on a table saw or band saw. Also allows you to cut the v-prongs in the turning square handle part of a full splice cue on a band saw. Learn More
  168. Cue Buff: Buffing Material (Click for Replacement Product Info)
    $15.00

    Cue Buff buffing material, buffs most cue finishes including the Cue Cote Custom Cue Finish and the Water Based Urethane Custom Cue Finish. 8 oz. Good replacement products for the Cue Buff are 3M Rubbing compound and Finessit buffing material or McGuires rubbing compound and polishing material. Learn More
  169. Cue Finish Water Based Urethane (Click for Replacement Product Info)
    Starting at $20.00

    Out of stock

    The water based urethane Custom Cue Finish is very easy to use. You can spray it on, or brush it on. It's fast drying too. Only 15 minutes between coats! A good replacement product for water based urethane is General Finishes Enduro Poly Gloss Water Based Urethane. Learn More
  170. Cue Cote Custom Cue Finish (Click for Replacement Product Info)
    Starting at $25.00

    Out of stock

    Cue Cote Custom Cue Finish, is a two part epoxy based finish, that does not need to be sprayed on. Can be brushed on then slowly rotated for a few hours to level out. Instructions included! The best off the shelf replacement for Cue Cote is Klockit Kraft Kote Clock Finish Learn More
  171. Cross Slide For Wood Lathe
    $275.00

    Carriage/Cross Slide For Wood Lathe Learn More
  172. Pinion Gear
    Starting at $8.00

    Pinion Gear (For use in Handwheel and Power Feed) Learn More
  173. Belts For Cue Smith Lathes
    Starting at $3.00

    Cue Smith Lathe Belts Learn More
  174. Collets - Shaft Collets
    Starting at $3.00

    Shaft Collets for protecting shaft when in chuck (order 3 for full set) Learn More
  175. Dremel Mount for Cue Smith Tool Post
    $30.00

    Dremel Mount for Cue Smith Tool Post (3/4-12 mount) Learn More
  176. Tenon Threader for Stainless Joint
    $45.00

    Tenon Threader for Stainless Joint, (5/8-11) or (5/8-18) your choice. Learn More
  177. Tenon Threader for Ferrule (5/16-18)
    $40.00

    Tenon Threader for Ferrule (5/16-18) Learn More
  178. Cross Slide - Compound  for Cue Smith Lathe
    $65.00

    Compound Cross-Slide for Cue Smith Lathe
    Rotates 360 degrees for cutting short angles.
    Includes cutting bit. Learn More
  179. Chuck - Rear Chuck for Metal Lathe
    $175.00

    Rear chuck for metal lathe, with micro screw adjusting back plate. This chuck is the same 1.4" bore self centering 3 jaw chuck we use on our Deluxe Cue Smith, but it has a special back plate with adjustable centering screws for easy accurate rear spindle mounting on many metal lathes and some cue lathes without additional machining needed. Learn More
  180. Boring Bar - Miniature Solid Carbide
    $45.00

    Miniature Solid Carbide Boring Bar for installing Uni-Loc, Radial pins and boring out ferrules, etc. Learn More
  181. Boring Bar - 6" Carbide Tip Square Shank
    $40.00

    6" Carbide tip boring bar (with square shank to fit normal toolpost) for boring out butt sleeves. Learn More
  182. Toolpost - Boring Bar Holder for Quick Change TP 3/8"
    $30.00

    Toolpost for above boring bar: Quick Change Holder. Learn More
  183. Boring Bar - 6" Carbide Tip 3/8" Round Shank
    $35.00

    6" Carbide Tip Boring Bar (with 3/8" round shank) for boring out butt sleeves: Learn More
  184. Coring Drill  .650" x 18"
    $165.00

    Coring drill .650" x 18" over all length, air cooled with quick connect fitting, 1/2" shank. Will drill about 15 inches. Makes coring forearms a breeze. Learn More
  185. Coring Drill .312" x 18"
    $135.00

    Coring drill .312" x 18" over all length, air cooled with quick connect fitting, 1/2" shank. Use as first step drill when step coring or for installing deep weight bolt balancing systems. Will drill about 15 inches. Learn More
  186. Metal Dust Cover for Bed
    $25.00

    The metal dust cover for bed eliminates getting glue, dust, or finish on bed. Learn More
  187. power feed auto stop bracket
    $40.00

    The power feed auto stop bracket is removable and trips the power feed switch when your cutter reaches the place you want it to stop. (Only for the Deluxe Cue Smith package one power feed type.) Learn More
  188. Latex Tubing
    $5.00

    Latex tubing for wrapping pressure around the cue when gluing in inlays or points. 3 foot lengths. Learn More
  189. Cue Wax for Shafts
    Starting at $8.00

    A special Carnuba Cue Wax blend that makes your cue shaft as smooth as silk. Learn More
  190. Cue Shaft Sealer (Click for Replacement Product Info)
    Starting at $10.00

    Out of stock

    Our Shaft Sealer is used after cleaning and before wax to seal the pores on the shaft. The best replacement product for Shaft Sealer is Mohawk Lacover 30. Learn More
  191. Live Center - Off-setting for cutting tapers 3/8" shank
    $85.00

    Off-setting live center for cutting tapers or point grooves 3/8" straight shank smaller unit. Learn More
  192. Live Center - Off-Setting  #2 or #3 Morse Taper
    $150.00

    Off-Setting Live Center for cutting tapers and point grooves #2 or #3 Morse Taper Learn More
  193. Live Center Small Diameter 60 degree
    $30.00

    Small Diameter Live Center for cutting shafts (1/2 shank), 60 degree Learn More
  194. Chuck - Drill Chuck 1/2 Inch 3/8-24-tpi
    $45.00

    1/2" (Inch) drill chuck with 3/8-24-tpi. Replacement chuck for all Cue Smith lathes. Learn More
  195. Lathe Inserts
    Starting at $12.00

    Lathe inserts for turning butts (5/16-18, 5/16-14, 3/8-10 & Radius/ Ball Screw) Learn More
  196. Lathe Pin - Universal Shaft Driver
    $25.00

    Universal Shaft Driver (Stainless lathe pin with pointed rubber driver for spinning non standard thread shafts). Learn More
  197. Lathe Pins
    Starting at $12.00

    Lathe pins for turning shafts (5/16-18, 5/16-14, 3/8-10, Cue Tech/ Scorpion style & Radius/ Ball Screw). Learn More
  198. The Cue Building Book: From Tree, To Tip, To Trade Show! Fifth Edition.
    Starting at $75.00

    By: Chris Hightower

    This is the most extensive book on cue building written to date. As the title suggests, it takes you through the complete cue building process from the sawmill, to the finished cue, to marketing your cues. It covers many things that the videos don’t. However, it is said that a picture is worth a thousand words. It covers doing work on wood lathes, metal lathes, and of course, cue lathes. It shows the table saw tapering machine, how to build your own spray booth, kiln, wood stabilizer dipping tank, collets, linen presses, inlay patterns and much more. It shows how to put on the finish with and without spraying, Irish linen and leather wraps, V-groove and butterfly points, inlays and much more.

    There is an "Advice from the Masters" chapter that gives advice to beginners from some of America’s most well known cue makers who have been building cues for decades. There is also a brief history on cue building in the USA. There is a suppliers list showing where to buy almost everything you need to build cues from shaft wood, to exotic woods and veneers, cue parts, manual and CNC machinery and small tooling. The book has nearly two hundred drawings, showing how to do the various operations and how to make the special jigs.

    It is a wealth of information contained in a format that is easy to read and refer back to. There is a section for your own notes in the back. Every beginner to intermediate cue maker should have this book and the advanced cue maker might still pick up some little tricks.

    Over 260 pages! FIFTH EDITION!

    ***INTERNET SPECIALS***
    The Cue Building Book and Any Two DVDs Only $150 Save $25 OR
    The Cue Building Book and Any Three DVDs Only $195 Save $30 OR
    The Cue Building Book and All Four DVDs Only $240 Save $35

    Learn More
  199. Dial Indicator - 2 Inch
    $50.00

    2” dial indicator mounts to bed next to carriage for cutting rings, butt plates and boring holes to exact lengths. Learn More
  200. Dial Indicator - 1 Inch
    $40.00

    1” dial indicator mounts on cross-slide or carriage for checking run out, setting up taper bars and cutting exact diameters. Learn More

Grid List

Set Ascending Direction

1-200 of 204

Page:
  1. 1
  2. 2