Makers of precision Cue Smith™ brand cue lathes and inlay machine!

Search results for 'junior cue'

Grid List

Set Ascending Direction

67 Item(s)

  1. Longer Cork Wrap

    Longer Cork cue wrap. approximately 18" long Learn More
  2. Cue Smith Tapering Machine
    Starting at $2,795.00

    This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, leadscrew power feed, butt and shaft taper bars, ER Collet headstock with dead center / spur driver and a 1/2" drill chuck on the tailstock with 60 degree live center and vertical router as well as an auto stop.. It takes up very little room at 4 feet long. This is the perfect machine to do your butt and shaft tapering to keep your other lathes free for other aspects of cue building. The speed range is fast enough to use for sanding and can be slowed down to a crawl for shaft tapering or finishing cues..The Basic Package one unit internet special is $2795. Package two comes with everything in package one plus removable shaft bar $50, Point Taper Bar $35, one additional shaft bar $150 and a small 60 degree live center for turning shafts $30. Only $2995 Save $65 Learn More
  3. Router with Deluxe Multi-Position Bracket
    $250.00

    Router with Deluxe Multi-Position Mounting Bracket. Also includes spur driver and 3/4" router bit. Will work in vertical, horizontal and angled positions on our Deluxe Cue Smith Lathe. Works in Vertical position on smaller lathes. Learn More
  4. White Diamond Jump Break Tip

    Picone White Diamond tips are a multi-layered tip. Made from a specially selected fiber, they go through an 11 step process before becoming a finished tip. Each tip is inspected before packaging to the insure you the highest quality. 14mm Learn More
  5. House Cue Ferrules 3/4"

    These ferrules are made for house cues and are 3/4 inch long and have a 5/16" hole going all the way through them. Learn More
  6. Router with Vertical Mounting Bracket
    $200.00

    Router with Standard Vertical Mounting Bracket. Also includes spur driver and 3/4" router bit. Will work in vertical position on our Deluxe Cue Smith Lathe and on smaller lathes. Learn More
  7. Ultra-Skin Tips

    Starting at: $9.95

    Laminated black pigskin tip. These tips hold chalk and grip the cue ball better than most laminated tips. Available in Pro Soft, Soft, Medium and Hard. 14mm Mix and match for discount! Learn More
  8. Gear Motor For Finishing
    $195.00

    This is a variable speed slow rotating gear motor to hook up to your Cue Smith lathe to apply finish like the Cue Cote or other finishes that need to the cue to slow rotate while curing. Learn More
  9. Cork Wrap

    Cork cue wrap. Learn More
  10. Internet Special #4 Free Inlay Pattern
    $3,095.00

    Purchase the Deluxe Cue Smith Cue Builders Special for $3195 or $3495 and the Self Contained Inlay Machine for $1895 and get any one extra in stock Inlay Pattern for free.
    A $100 Savings.

    Learn More
  11. Internet Special #2 Complete Tapered Cue Kit
    $95.00

    1- Ziricote 28”+ completely tapered butt
    1- #1.5 Final sanding size shaft blank
    1- Butt plate
    2- Joint Rings
    1- 3/8-10 Joint pin.
    1- Ferrule
    1- Le-ProTip
    1- Rubber Bumper
    ONLY $95

    For assembly instructions we suggest the Basic Cue Building and Repair DVD $50

    Only requires minor machining, drilling and tapping.

    Perfect for those who have a lathe that does not have
    tapering capabilities.

    No Substitutions!

    Learn More
  12. specials
    Starting at $185.00

    Internet Special #1
    **Jump Start 6 pack special!**
    1- Bocote 30” x 1.375” butt dowel
    1- Purple Heart 30” x 1.375” butt dowel
    1- Ziricote 28”+ partially tapered butt
    1- Bocote 18” x 1.375” dowel
    1- Ebony forearm 18” x 1.200” doweled
    1- Ebony butt sleeve 3.75” x 1.375” dowel
    1- Medium Rosewood 18” x 1.375” dowel
    3- Maple Handles 18” x 1.375” dowels
    ONLY $185 (save $$)

    Add 6 #1 mix shaft dowels for $65 more =$250 (Save $$)
    This is all the wood needed for 6 complete cues!

    **Most of this exotic wood came from closed cue factories and the wood
    has been in it's present state for several years. You can't ask for
    more stable wood to give you a Jump Start building your cues.**

    Makes a great starter kit for the beginning cue maker or a great addition to the
    inventory of any cue shop! There is no limit on how many you can buy, so stock up!
    This wood is all carefully kiln dried.

    No Substitutions!

    The above pieces can be purchased individually on our Wood Shop page.

    USA ORDERS ONLY! Learn More
  13. Full Splice Butt Blanks - Black Ebony into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  14. Full Splice Butt Blanks - Coco-Bolo into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  15. Full Splice Butt Blanks - Shedua into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  16. Full Splice Butt Blanks - Rosewood into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  17. Full Splice Butt Blanks - Purple Heart into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  18. Full Splice Butt Blanks - Bocote into Maple

    These are made from high quality exotic woods spliced into maple and the points are very close to even. They are approximately 30" long and tapered down to where you can put the finish passes on them pretty fast. Don't confuse these with a bar butt that has been chopped off. These are spliced up this length to assure point alignment. The Rosewood and the Bocote handle/points into Maple has made some of the best playing cues. It balances out unbelievably well and rarely needs a weight bolt. The Ebony into Maple butts and the Coco-Bolo into Maple tend to make heavier cues.

    SPECIAL: Buy any 3 and take $5 off each butt!

    Learn More
  19. Pattern 15

    Out of stock

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  20. Pattern 14

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  21. Inlay Pattern #13 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  22. Inlay Pattern #12 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  23. Inlay Pattern #11 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  24. Inlay Pattern #10 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  25. Inlay Pattern #9 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  26. Inlay Pattern #8 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  27. Inlay Pattern #7 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  28. Inlay Pattern #6 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  29. Inlay Pattern #5 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  30. Inlay Pattern #4 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  31. Inlay Pattern #3 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  32. Inlay Pattern #2 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  33. Inlay Pattern #1 for Cue Smith Inlay Machine

    All Patterns are made of brass and most are slightly larger than drawings!

    Learn More
  34. Cue Smith Inlay Machine
    Starting at $1,895.00

    What is the CUE SMITH INLAY MACHINE and how does it work? In technical terms it is a Three Axis Linear Motion Manual Pantomill with .001" micro adjustments. It has the ability to cut out the part from your inlay material (Ivory, Abalone, Wood, Silver, Gold, Mother-of Pearl, Plastic, etc...) then cut the pocket out of the cue to accept the part. You can also make patterns with this machine. Learn More
  35. Cue Finishing and Wrapping Lathe
    Starting at $795.00

    This lathe comes with a powerful 3/4 HP variable speed DC motor. The basic unit comes with 4 foot bed, a three jaw chuck on the headstock and a 1/2” chuck on the tailstock. It is very portable and under 30 pounds and 4 feet long. This is the perfect second function lathe for shop or tournament work. You can do shaft cleaning, reconditioning, sanding or butt sanding and finishing on it with some accessories. The speed range is from about 200 to 2000 rpm. You can add a foot control for wrapping. Learn More
  36. Micro Cue Smith III™ Cue Lathe
    $1,195.00

    This is our most portable Lathe. It uses the same headstock, chuck, tailstock,and cross-slide as our Mid Size Cue Smith lathe yet is super portable. At only 36" it is very compact, and the basic unit weighs under 30 pounds, so you can take it anywhere to do on the spot cue repairs. This is all the lathe you need for tips and ferrules on two-piece cues, but that is about all it is designed to do with the lightweight motor. Learn More
  37. Micro Cue Smith II™ Cue Lathe
    $1,395.00

    This is the modern version of the original in highly portable cue lathes. It uses the same high quality parts as the Mid-Size Cue Smith, yet it is only 36" long and the main lathe weighs less than 40 pounds. Learn More
  38. Mid Size Cue Smith Lathe with sliding Headstock
    Starting at $1,450.00

    This lathe is only slightly less portable than the MICRO CUE SMITH II and weighs in at just over 40 pounds and is only 48 inches long. There are no Bed Extensions to hassle with even when doing house cues. It does Tips, Ferrules, Shaft Reconditioning, Joint Work, House Cues, Wraps and could build a cue with the right options added.

     

    Our most popular Repair Lathe!

    Learn More
  39. Deluxe Cue Smith™ Cue Lathe
    Starting at $1,995.00

    This is the machine for the serious cue maker! This shows the Deluxe Cue Smith headstock with both chucks, the larger handwheel, and larger tailstock. You can use the steady rest behind or in front of the headstock. The headstock has 24 position indexing for cutting points, slots or inlays.

    Deluxe Cue Smith (base price) $1995.00

    Additional options below included in packages one and two:

    Aluminum Storage Cabinet with 25% more storage space than the older wood cabinet $275
    Taper Attachments $495.00
    Vertical Router, Spur Driver and Bit $200.00
    Power Feed (Handwheel replacement type) $175.00
    Rear Chuck $100.00

    Choice of 1/2 HP or 3/4 HP Variable Speed DC Motor included.

    60 Degree Live Center $35.00
    Sealer, Cleaner, Wax $26.00
    Extra steady rest $95.00

    Plus boring bar $8, cut off tool $8 and an extra two-way tool post $12)
    Regular Price $3444.00
    Package #1 Special price (Total Savings $249) $3195.00

    Package #2 comes with heavier duty leadscrew Power Feed and all other options in package #1
    Regular price $3769.00
    Package #2 Special price (Total Savings $274) $3495.00
    See our SPECIALS page for more savings and see below for more options.

     

    Additional Options:

    The above Package One Deluxe without Aluminum Storage Cabinet $3045

    The above Package Two Deluxe without Aluminum Storage Cabinet $3345

    Either package comes with your choice of 1/2 HP DC Variable speed motor on sliding headstock or Stationary Headstock with 3/4 HP DC variable speed motor

    The 3/4 HP motor is strong enough for coring, but eliminates the ability to taper one piece cues with your router

    Unless you want to build 1 piece cues we strongly suggest the 3/4HP motor.

    Removable Shaft Bar $50 (Allows you to remove your shaft bar and keep the settings)

    Additional Shaft Bars $150 (Allows you to set up different bars for different tapers)

    Additional Router brackets for multi-position mounting $50

    Additional #2 Morse Taper Tailstock $210

    Thread Milling Attachment for Package 2 $450

     

     

    Learn More
  40. High Action- Low Deflection Ferrules.. Replacements for Meucci and more!
    Starting at $4.00

    This is the material to use to replace Meucci ferrules or use on your custom cues.
    Gives higher action lower deflection hit and is available in 1" or 1.250" length. Threaded

    Discounts for Quantity Learn More
  41. Sniper Tips

    High quality USA made laminated boar hide tip that has been tanned underground the old fashion way without chemicals and really gives a good grip on the cue ball. Medium hit. 14mm Learn More
  42. Cue Finishing Made Simple DVD
    $50.00

    By: Chris Hightower

    Almost 3 Hours (DVD)

    Includes: Cue Cote Epoxy, Super Glue, and Water Based Urethane Finishing, Re-Finishing, Carbide Sanding Mandrels, Brushing and Spraying Methods!

    Learn More
  43. Advanced Cue Building DVD Volume 2: Cue Assembly, Boring, Coring, Tenons and More.
    $50.00

    By: Chris Hightower

    Almost 2.5 Hours (DVD)

    Includes: Assembly, Boring, Coring, Indicator Readouts, Ring Work, Tenons, Threading and more!

    Learn More
  44. Advanced Cue Building DVD Volume 1: Points and Inlays!
    $50.00

    By: Chris Hightower

    Almost 3 Hours (DVD)

    Includes: Inlaying, Pattern Making, Veneers, Re-Cut, Full Splice and Butterfly Points and more.

    The work is done on our Cue Smith Lathe and Inlay Machine.

    This video comes with a $50 credit toward the purchase a Cue Smith Inlay Machine!

    Learn More
  45. Basic Cue Building and Repair DVD
    $50.00

    By: Chris Hightower

    2.5 Hours (DVD or VHS)

    This video covers replacing tips, ferrules, wraps, shaft reconditioning, joint work, turning butts and shafts from scratch with and without taper attachments and more.

    All the work is done on our Cue Smith Lathes.

    This video comes with a $50 credit toward the purchase a Cue Smith Lathe!

    Learn More
  46. A Leather Wrap Fixture
    Starting at $195.00

    Cue Smith Leather Wrap Fixture
    For Cue Smith Lathes

    Includes:

    • Mounted Seaming guide
    • Wrap length and end radius template
    • 5 mixed leather wraps (our choice)
    • Length measuring sliding ruler
    • Foam glue applicators and razor blades
    • Instruction DVD

    The Cue Smith Leather Wrap Fixture is designed to work only on the Cue Smith Lathes with indexing headstocks.

    The Cue Smith Leather Wrap Fixture makes leather installation a breeze with a little practice.

    Our Deluxe Wrap Fixture comes with the Adjustable Length Leather Template instead of Standard Template and Ruler! Learn More
  47. Camel Bone Ivory

    This is the best natural substitute for Elephant Ivory that I have seen. It machines just like Elephant Ivory and has a off white cast to it like Elephant ivory. Unlike the Elephant the Camel is not endangered. The slabs are approximately 8" long by 7/8" wide and 3/16" thick. Great for points and inlays.

    Picture of Camel Bone inlaid cue below:

    Learn More
  48. Shaft Wood #2 Mix Grade

    Wood hand selected and graded for custom cues!
    1" X 30" Hard Rock Maple Shaft Dowels
    #2 Mix Yields Approximately
    20% #1 or AAA Grade
    60 % #1.5 & #2 or A+ to B Grades
    20% #3 or C Grade
    Learn More
  49. Shaft Wood #1 Mix Grade

    Wood hand selected and graded for custom cues!

    1" X 30" Hard Rock Maple Shaft Dowels or White Ash Shaft Dowels

    #1 Mix Yields Approximately
    50% #1 or AAA Grade
    40% #1.5 & #2 or A+ to B Grades
    10% #3 or C Grade

    Learn More
  50. Router Bit - Straight 3/4" Bit
    $20.00

    Straight 3/4" Bit for tapering cues and more Learn More
  51. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, two carbide thread mill bits, and your choice of one thread gear/ belt set: $575 on Deluxe package #1 and $450 on Deluxe package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one exteral threading bits) $50 each.

    Learn More
  52. Butterfly and Full Splice Jig
    $40.00

    For band saws and table saws (cuts angles and prongs in turning squares). Cuts the flat taper angle on a turning square for gluing your butterfly pieces to on a table saw or band saw. Also allows you to cut the v-prongs in the turning square handle part of a full splice cue on a band saw. Learn More
  53. Cue Buff: Buffing Material
    $15.00

    Cue Buff buffing material, buffs most cue finishes including the Cue Cote Custom Cue Finish and the Water Based Urethane Custom Cue Finish. 8 oz. Learn More
  54. Water Based Urethane Custom Cue Finish
    Starting at $20.00

    The water based urethane Custom Cue Finish is very easy to use. You can spray it on, or brush it on. It's fast drying too. Only 15 minutes between coats! Learn More
  55. Cue Cote Custom Cue Finish
    $45.00

    Cue Cote Custom Cue Finish, is a two part epoxy based finish, that does not need to be sprayed on. Can be brushed on then slowly rotated for a few hours to level out. Instructions included! Learn More
  56. Belts For Cue Smith Lathes
    Starting at $3.00

    Cue Smith Lathe Belts Learn More
  57. Dremel Mount for Cue Smith Tool Post
    $30.00

    Dremel Mount for Cue Smith Tool Post (3/4-12 mount) Learn More
  58. Cross Slide - Compound for Cue Smith Lathe
    $65.00

    Compound Cross-Slide for Cue Smith Lathe
    Rotates 360 degrees for cutting short angles.
    Includes cutting bit. Learn More
  59. Chuck - Rear Chuck for Metal Lathe
    $175.00

    Rear chuck for metal lathe, with micro screw adjusting back plate. This chuck is the same 1.4" bore self centering 3 jaw chuck we use on our Deluxe Cue Smith, but it has a special back plate with adjustable centering screws for easy accurate rear spindle mounting on many metal lathes and some cue lathes without additional machining needed. Learn More
  60. power feed auto stop bracket
    $40.00

    The power feed auto stop bracket is removable and trips the power feed switch when your cutter reaches the place you want it to stop. (Only for the Deluxe Cue Smith package one power feed type.) Learn More
  61. Latex Tubing
    $5.00

    Latex tubing for wrapping pressure around the cue when gluing in inlays or points. 3 foot lengths. Learn More
  62. Shaft Cue Wax
    Starting at $8.00

    A special Carnuba Cue Wax blend that makes your cue shaft as smooth as silk. Learn More
  63. Chuck - Drill Chuck 1/2 Inch 3/8-24-tpi
    $45.00

    1/2" (Inch) drill chuck with 3/8-24-tpi. Replacement chuck for all Cue Smith lathes. Learn More
  64. Lathe Pins
    Starting at $12.00

    Lathe pins for turning shafts (5/16-18, 5/16-14, 3/8-10, Cue Tech/ Scorpion style & Radius/ Ball Screw). Learn More
  65. The Cue Building Book: From Tree, To Tip, To Trade Show!
    Starting at $69.95

    By: Chris Hightower

    This is the most extensive book on cue building written to date. As the title suggests, it takes you through the complete cue building process from the sawmill, to the finished cue, to marketing your cues. It covers many things that the videos don’t. However, it is said that a picture is worth a thousand words. It covers doing work on wood lathes, metal lathes, and of course, cue lathes. It shows the table saw tapering machine, how to build your own spray booth, kiln, wood stabilizer dipping tank, collets, linen presses, inlay patterns and much more. It shows how to put on the finish with and without spraying, Irish linen and leather wraps, V-groove and butterfly points, inlays and much more.

    There is an "Advice from the Masters" chapter that gives advice to beginners from some of America’s most well known cue makers who have been building cues for decades. There is also a brief history on cue building in the USA. There is a suppliers list showing where to buy almost everything you need to build cues from shaft wood, to exotic woods and veneers, cue parts, manual and CNC machinery and small tooling. The book has nearly two hundred drawings, showing how to do the various operations and how to make the special jigs.

    It is a wealth of information contained in a format that is easy to read and refer back to. There is a section for your own notes in the back. Every beginner to intermediate cue maker should have this book and the advanced cue maker might still pick up some little tricks.

    Over 260 pages! THIRD EDITION!

    ***INTERNET SPECIALS***
    The Cue Building Book and Any Two DVDs Only $150 Save $19.95 OR
    The Cue Building Book and Any Three DVDs Only $195 Save $24.95 OR
    The Cue Building Book and All Four DVDs Only $240 Save $29.95

    Learn More
  66. Steady Rest for House Cues
    $95.00

    House Cue Steady Rest (Cue Smith Type) Learn More
  67. Bed Extension
    Starting at $125.00

    Bed extension for any Cue Smith Lathe, will snap on and off either end of the lathe. Use with house steady rest for doing one piece cues! Learn More

Grid List

Set Ascending Direction

67 Item(s)