Makers of precision Cue Smith™ brand cue lathes and inlay machine!

Search results for 'medium hit ferrules'

Grid List

Set Ascending Direction

50 Item(s)

  1. Tuxedo Black and White

    Calf skin leather wrap with Tuxedo Black and White embossing Learn More
  2. White Diamond Jump Break Tip

    Picone White Diamond tips are a multi-layered tip. Made from a specially selected fiber, they go through an 11 step process before becoming a finished tip. Each tip is inspected before packaging to the insure you the highest quality. 14mm Learn More
  3. House Cue Ferrules 3/4"

    These ferrules are made for house cues and are 3/4 inch long and have a 5/16" hole going all the way through them. Learn More
  4. Ostrich Medium Brown

    Leather wrap with medium brown ostrich embossing. Learn More
  5. Smooth White

    Leather wrap smooth creamy white. Learn More
  6. Smooth Medium Brown

    Leather wrap smooth medium brown. Learn More
  7. Ultra-Skin Tips

    Starting at: $9.95

    Laminated black pigskin tip. These tips hold chalk and grip the cue ball better than most laminated tips. Available in Pro Soft, Soft, Medium and Hard. 14mm Mix and match for discount! Learn More
  8. Moori

    Starting at: $15.00

    Laminated pigskin tip made in Japan. The original multi layered tip. Available in Soft, Medium and Quick/Hard. 14mm Learn More
  9. specials
    Starting at $185.00

    Internet Special #1
    **Jump Start 6 pack special!**
    1- Bocote 30” x 1.375” butt dowel
    1- Purple Heart 30” x 1.375” butt dowel
    1- Ziricote 28”+ partially tapered butt
    1- Bocote 18” x 1.375” dowel
    1- Ebony forearm 18” x 1.200” doweled
    1- Ebony butt sleeve 3.75” x 1.375” dowel
    1- Medium Rosewood 18” x 1.375” dowel
    3- Maple Handles 18” x 1.375” dowels
    ONLY $185 (save $$)

    Add 6 #1 mix shaft dowels for $65 more =$250 (Save $$)
    This is all the wood needed for 6 complete cues!

    **Most of this exotic wood came from closed cue factories and the wood
    has been in it's present state for several years. You can't ask for
    more stable wood to give you a Jump Start building your cues.**

    Makes a great starter kit for the beginning cue maker or a great addition to the
    inventory of any cue shop! There is no limit on how many you can buy, so stock up!
    This wood is all carefully kiln dried.

    No Substitutions!

    The above pieces can be purchased individually on our Wood Shop page.

    USA ORDERS ONLY! Learn More
  10. Pearl Rods 1-3/8" x 6" long

    Starting at: $15.00

    Pearl Rods 1-3/8" x 6" long Learn More
  11. Tiger Tips Medium

    Medium USA made laminated pigskin tip that makes a great laminated alternative to the Le Pro and other medium hard tips. 14mm

    Softer USA made laminated cow hide tip. A great laminated alternative to the Elk Master and other soft tips. Holds shape better than non-layered soft tips. 14mm Learn More
  12. Kamui Black Tips

    Starting at: $22.75

    Out of stock

    Laminated pigskin tip made in Japan. Many are now proclaiming this to be the best tip in the world. Available in Super Soft, Soft and Medium. 14mm Learn More
  13. Micro Cue Smith III™ Cue Lathe
    $1,195.00

    This is our most portable Lathe. It uses the same headstock, chuck, tailstock,and cross-slide as our Mid Size Cue Smith lathe yet is super portable. At only 36" it is very compact, and the basic unit weighs under 30 pounds, so you can take it anywhere to do on the spot cue repairs. This is all the lathe you need for tips and ferrules on two-piece cues, but that is about all it is designed to do with the lightweight motor. Learn More
  14. Micro Cue Smith II™ Cue Lathe
    $1,395.00

    This is the modern version of the original in highly portable cue lathes. It uses the same high quality parts as the Mid-Size Cue Smith, yet it is only 36" long and the main lathe weighs less than 40 pounds. Learn More
  15. Mid Size Cue Smith Lathe with sliding Headstock
    Starting at $1,450.00

    This lathe is only slightly less portable than the MICRO CUE SMITH II and weighs in at just over 40 pounds and is only 48 inches long. There are no Bed Extensions to hassle with even when doing house cues. It does Tips, Ferrules, Shaft Reconditioning, Joint Work, House Cues, Wraps and could build a cue with the right options added.

     

    Our most popular Repair Lathe!

    Learn More
  16. Deluxe Cue Smith™ Cue Lathe
    Starting at $1,995.00

    This is the machine for the serious cue maker! This shows the Deluxe Cue Smith headstock with both chucks, the larger handwheel, and larger tailstock. You can use the steady rest behind or in front of the headstock. The headstock has 24 position indexing for cutting points, slots or inlays.

    Deluxe Cue Smith (base price) $1995.00

    Additional options below included in packages one and two:

    Aluminum Storage Cabinet with 25% more storage space than the older wood cabinet $275
    Taper Attachments $495.00
    Vertical Router, Spur Driver and Bit $200.00
    Power Feed (Handwheel replacement type) $175.00
    Rear Chuck $100.00

    Choice of 1/2 HP or 3/4 HP Variable Speed DC Motor included.

    60 Degree Live Center $35.00
    Sealer, Cleaner, Wax $26.00
    Extra steady rest $95.00

    Plus boring bar $8, cut off tool $8 and an extra two-way tool post $12)
    Regular Price $3444.00
    Package #1 Special price (Total Savings $249) $3195.00

    Package #2 comes with heavier duty leadscrew Power Feed and all other options in package #1
    Regular price $3769.00
    Package #2 Special price (Total Savings $274) $3495.00
    See our SPECIALS page for more savings and see below for more options.

     

    Additional Options:

    The above Package One Deluxe without Aluminum Storage Cabinet $3045

    The above Package Two Deluxe without Aluminum Storage Cabinet $3345

    Either package comes with your choice of 1/2 HP DC Variable speed motor on sliding headstock or Stationary Headstock with 3/4 HP DC variable speed motor

    The 3/4 HP motor is strong enough for coring, but eliminates the ability to taper one piece cues with your router

    Unless you want to build 1 piece cues we strongly suggest the 3/4HP motor.

    Removable Shaft Bar $50 (Allows you to remove your shaft bar and keep the settings)

    Additional Shaft Bars $150 (Allows you to set up different bars for different tapers)

    Additional Router brackets for multi-position mounting $50

    Additional #2 Morse Taper Tailstock $210

    Thread Milling Attachment for Package 2 $450

     

     

    Learn More
  17. 10 Mixed Ferrules
    $35.00

    10 Mixed Ferrules (various kinds of threaded and non threaded) Be prepared for any repair. Learn More
  18. Phenolic Ferrules
    Starting at $4.00

    Ferrules and Solid 1 inch or 1.250" long blanks for making any type ferrule desired.

    Discounts for quantity Learn More
  19. Juma Threaded Ferrules
    Starting at $3.50

    Juma Threaded Ferrules
    Gives a very natural medium hit. Machines easy and polishes nicely.

    Learn More
  20. High Action- Low Deflection Ferrules.. Replacements for Meucci and more!
    Starting at $4.00

    This is the material to use to replace Meucci ferrules or use on your custom cues.
    Gives higher action lower deflection hit and is available in 1" or 1.250" length. Threaded

    Discounts for Quantity Learn More
  21. High Action - Low Deflection Threaded Ferrules

    High Action - Low Deflection Threaded Ferrules one inch

    Discounts for Quantity Learn More
  22. White Linen Based Ferrules
    Starting at $4.00

    Threaded, fine weave, white linen based ferrules. Gives a medium hard hit. Linen based Melamine.
    Available in 1" or 1.250" or 1 foot length.
    Threaded or unthreaded.

    Discounts for quantity Learn More
  23. Yellow Micarta Ferrules
    Starting at $4.00

    Yellow micarta ferrules.
    Strong Material that polishes nicely and machines easily. Gives a medium hard hit. USA Micarta.

    Available in 1 inch, 1.25 inch, or 1 foot, solid, or drilled and threaded. Quantity DIscounts. Learn More
  24. Elk Master Tips (10 Tips)
    $8.00

    This is the tip for those who want a softer hit. 14mm Learn More
  25. Triangle Tips (10 Tips)
    $12.00

    Gives a medium hit. My favorite non-layered tip! 14mm Learn More
  26. Le-Professional / Le-Pro - (10 Tips)
    $8.00

    The worlds most popular tip. Gives a medium hard hit. 14mm Learn More
  27. Pigskin Pro Tips (10 Tips)
    $30.00

    Laminated pigskin gives a medium hit. One of the best layered tips on the market for the money. 14mm Learn More
  28. Buffalo Pro Tips (10 Tips)
    $25.00

    Laminated chromed buffalo hide gives a hard hit. A great really hard players tip. Plays similar to the old French Champion tips. 14mm Learn More
  29. Razorback Tips

    Laminated pigskin gives a medium to medium hard hit. Over 20 layers of very high quality pigskin leather. Many like it as well as the Moori. 14mm Learn More
  30. Wizard Tips

    Laminated pigskin tip that is very often compared to the Moori. Available in Medium and Hard. 14mm Learn More
  31. Emerald Tips

    Medium Hard USA made from recycled laminated pigskin. Green in color. 14mm Learn More
  32. Dynamite Tips

    Medium Hard USA made laminated pigskin tip that makes a great laminated tip in most players budget. 14mm Learn More
  33. Tiger Tips Soft

    Medium USA made laminated pigskin tip that makes a great laminated alternative to the Le Pro and other medium hard tips. 14mm

    Softer USA made laminated cow hide tip. A great laminated alternative to the Elk Master and other soft tips. Holds shape better than non-layered soft tips. 14mm Learn More
  34. Everest Tips

    Medium USA made laminated pigskin tip is very often compared to the Moori. Many like it better. 14mm Learn More
  35. Sniper Tips

    High quality USA made laminated boar hide tip that has been tanned underground the old fashion way without chemicals and really gives a good grip on the cue ball. Medium hit. 14mm Learn More
  36. Ninja Synthetic Tips

    USA Made! Medium hard hit. (Holds shape much better than leather) Learn More
  37. Basic Cue Building and Repair DVD
    $50.00

    By: Chris Hightower

    2.5 Hours (DVD or VHS)

    This video covers replacing tips, ferrules, wraps, shaft reconditioning, joint work, turning butts and shafts from scratch with and without taper attachments and more.

    All the work is done on our Cue Smith Lathes.

    This video comes with a $50 credit toward the purchase a Cue Smith Lathe!

    Learn More
  38. Python Black and White

    Leather wrap with black and white python embossing. Learn More
  39. leather wrap medium brown

    Leather wrap medium brown. Learn More
  40. leather wrap medium brown gator

    Leather wrap with medium brown gator embossing. Learn More
  41. leather wrap brown white gator

    Leather wrap with brown white gator embossing. Learn More
  42. Internet Special #5 Complete Black Buffalo Horn Kit
    Starting at $30.00

    Complete Black Buffalo Horn Kit
    Includes:
    1-Buffalo Butt Plate
    1-Buffalo Joint
    2-Buffalo Ferrules


    Add one 3/16" X 1.25" X 8" Buffalo slab for $10 Learn More
  43. Malachite
    Starting at $10.00

    Manufactured Stone Slab
    Dimension are approximate. Learn More
  44. White Turquoise with Black Web
    Starting at $10.00

    Manufactured Stone Slab
    Dimension are approximate. Learn More
  45. Black Buffalo Horn Ferrules

    Black Water Buffalo Horn turned round. Polishes very nicely! Learn More
  46. Camel Bone Ivory

    This is the best natural substitute for Elephant Ivory that I have seen. It machines just like Elephant Ivory and has a off white cast to it like Elephant ivory. Unlike the Elephant the Camel is not endangered. The slabs are approximately 8" long by 7/8" wide and 3/16" thick. Great for points and inlays.

    Picture of Camel Bone inlaid cue below:

    Learn More
  47. White Holly (natures ivory colored wood) Wood Inlay Slab
    $7.00

    White Holly wood: natures ivory colored wood, inlay slab.
    3/16" x 1-1/2" x 9" Learn More
  48. Shaft Wood #1 Mix Grade

    Wood hand selected and graded for custom cues!

    1" X 30" Hard Rock Maple Shaft Dowels or White Ash Shaft Dowels

    #1 Mix Yields Approximately
    50% #1 or AAA Grade
    40% #1.5 & #2 or A+ to B Grades
    10% #3 or C Grade

    Learn More
  49. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, two carbide thread mill bits, and your choice of one thread gear/ belt set: $575 on Deluxe package #1 and $450 on Deluxe package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one exteral threading bits) $50 each.

    Learn More
  50. Boring Bar - Miniature Solid Carbide
    $40.00

    Miniature Solid Carbide Boring Bar for installing Uni-Loc, Radial pins and boring out ferrules, etc. Learn More

Grid List

Set Ascending Direction

50 Item(s)