Makers of precision Cue Smith™ brand cue lathes and inlay machine!

Lathe Accessories & Tools

Grid List

Set Descending Direction

95 Item(s)

  1. A Leather Wrap Fixture
    Starting at $195.00

    Cue Smith Leather Wrap Fixture
    For Cue Smith Lathes

    Includes:

    • Mounted Seaming guide
    • Wrap length and end radius template
    • 5 mixed leather wraps (our choice)
    • Length measuring sliding ruler
    • Foam glue applicators and razor blades
    • Instruction DVD

    The Cue Smith Leather Wrap Fixture is designed to work only on the Cue Smith Lathes with indexing headstocks.

    The Cue Smith Leather Wrap Fixture makes leather installation a breeze with a little practice.

    Our Deluxe Wrap Fixture comes with the Adjustable Length Leather Template instead of Standard Template and Ruler! Learn More
  2. Leather Wrap Template
    $45.00

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. Learn More
  3. A Leather Wrap Template Adjustable Length
    $125.00

    Leather Wrap Template for cutting the proper radius on the ends of the leather wrap when cutting it to length. It expands so you can just set it in your wrap groove and extend it to the ends for exact length cutting. Learn More
  4. A Tip Shaping Guide & Blade Rest
    $30.00

    This is a shaping guide for those who prefer to use the utility blade to hand shape the tip.

    It has 3 radius guides on the rest. Nickel, Penny and Dime size radiuses.

    This takes the guess work out of it and mounts on one side of your tool post.

    Learn More
  5. Automatic Tip Shaper
    Starting at $45.00

    Automatic Tip Shaper Learn More
  6. Bed Extension
    Starting at $125.00

    Bed extension for any Cue Smith Lathe, will snap on and off either end of the lathe. Use with house steady rest for doing one piece cues! Learn More
  7. Belts For Cue Smith Lathes
    Starting at $3.00

    Cue Smith Lathe Belts Learn More
  8. Black Epoxy Dye
    $5.00

    Black Epoxy Dye Learn More
  9. Boring Bar - 6" Carbide Tip 3/8" Round Shank
    $35.00

    6" Carbide Tip Boring Bar (with 3/8" round shank) for boring out butt sleeves: Learn More
  10. Boring Bar - 6" Carbide Tip Square Shank
    $40.00

    6" Carbide tip boring bar (with square shank to fit normal toolpost) for boring out butt sleeves. Learn More
  11. Boring Bar - Miniature Solid Carbide
    $45.00

    Miniature Solid Carbide Boring Bar for installing Uni-Loc, Radial pins and boring out ferrules, etc. Learn More
  12. Butterfly and Full Splice Jig
    $40.00

    For band saws and table saws (cuts angles and prongs in turning squares). Cuts the flat taper angle on a turning square for gluing your butterfly pieces to on a table saw or band saw. Also allows you to cut the v-prongs in the turning square handle part of a full splice cue on a band saw. Learn More
  13. Carbide Inlay Cutting Bits .035” Pack of five

    Carbide Inlay Cutting Bits .035”
    Pack of 5 starting at $4 per bit Learn More
  14. Carbide Inlay Cutting Bits .055” Pack of Five

    Carbide Inlay Cutting Bits .055”
    Pack of 5 starting at $4 per bit Learn More
  15. Carbide Thread Milling Bit 1/4” shank
    $99.95

    Carbide Thread Milling Internal Bit 1/4"” shank Cuts external threads from 14 threads per inch and finer up to 1.800" long. Cuts internal threads from 10 threads per inch and finer up to 1.800" deep. Minimum drilled hole bore of 1/4" required for internal threading. Learn More
  16. Carbide Thread Milling External Bit 1/4"” shank
    $35.00

    Carbide Thread Milling External Bit 1/4"” shank Cuts external threads from 6 threads per inch and finer. Learn More
  17. Carbide Thread Milling External Bit 1/8” shank
    $50.00

    Carbide Thread Milling External Bit 1/8” shank It will thread 8 threads per inch and finer. Single flute. Learn More
  18. Carbide Thread Milling Internal Bit 1/8” shank
    $50.00

    Carbide Thread Milling Internal Bit 1/8” shank It will thread 10 threads per inch and finer. Single flute. Learn More
  19. Center Drill Set
    $25.00

    Center Drill Set Learn More
  20. Chuck - Drill Chuck 1/2 Inch 3/8-24-tpi
    $45.00

    1/2" (Inch) drill chuck with 3/8-24-tpi. Replacement chuck for all Cue Smith lathes. Learn More
  21. Chuck - Drill Chuck 5/8 Inch MT #1 or MT #2
    $45.00

    5/8" (Inch) drill chuck with #1 or #2 Morse Taper. Learn More
  22. Chuck - Rear Chuck for Metal Lathe
    $175.00

    Rear chuck for metal lathe, with micro screw adjusting back plate. This chuck is the same 1.4" bore self centering 3 jaw chuck we use on our Deluxe Cue Smith, but it has a special back plate with adjustable centering screws for easy accurate rear spindle mounting on many metal lathes and some cue lathes without additional machining needed. Learn More
  23. Chuck - Self-Centering Three Jaw Deluxe Large 1.4" Bore Chuck
    $100.00

    Self-Centering Three Jaw Chuck with Deluxe thread and large 1.4" bore. Learn More
  24. Chuck - Self-centering Three Jaw Chuck
    $75.00

    Self-centering Three Jaw Chuck with 3/4-16 thread. Learn More
  25. Collet 1/8"
    $10.00

    For using 1/8" end mills in 1/4" router for cutting stitch rings. Learn More
  26. Collets - Shaft Collets
    Starting at $3.00

    Shaft Collets for protecting shaft when in chuck (order 3 for full set) Learn More
  27. Collets - Ten (10) Butt/Joint Collets
    $75.00

    Ten (10) Butt/Joint Collets, 1.378" OD with 10 ID's from .750" to 1.312" Learn More
  28. Coring Drill .650" x 18"
    $165.00

    Coring drill .650" x 18" over all length, air cooled with quick connect fitting, 1/2" shank. Will drill about 15 inches. Makes coring forearms a breeze. Learn More
  29. Coring Drill .312" x 18"
    $135.00

    Coring drill .312" x 18" over all length, air cooled with quick connect fitting, 1/2" shank. Use as first step drill when step coring or for installing deep weight bolt balancing systems. Will drill about 15 inches. Learn More
  30. Coring Drill .775" x 18"
    $175.00

    Coring Drill .775" x 18" over all length, air cooled with quick connect fitting, 1/2" shank. Will drill about 15 inches. Makes coring handles a breeze. Learn More
  31. Cross Slide - Compound for Cue Smith Lathe
    $65.00

    Compound Cross-Slide for Cue Smith Lathe
    Rotates 360 degrees for cutting short angles.
    Includes cutting bit. Learn More
  32. Cross Slide - Extra Top Slides
    $50.00

    Extra non-rotating extra top slides for machines with taper bars. Learn More
  33. Cross Slide For Wood Lathe
    $275.00

    Carriage/Cross Slide For Wood Lathe Learn More
  34. Cue Buff: Buffing Material (Click for Replacement Product Info)
    $15.00

    Cue Buff buffing material, buffs most cue finishes including the Cue Cote Custom Cue Finish and the Water Based Urethane Custom Cue Finish. 8 oz. Good replacement products for the Cue Buff are 3M Rubbing compound and Finessit buffing material or McGuires rubbing compound and polishing material. Learn More
  35. Cue Cote Custom Cue Finish (Click for Replacement Product Info)
    Starting at $25.00

    Out of stock

    Cue Cote Custom Cue Finish, is a two part epoxy based finish, that does not need to be sprayed on. Can be brushed on then slowly rotated for a few hours to level out. Instructions included! The best off the shelf replacement for Cue Cote is Klockit Kraft Kote Clock Finish Learn More
  36. Cue Finish Water Based Urethane (Click for Replacement Product Info)
    Starting at $20.00

    Out of stock

    The water based urethane Custom Cue Finish is very easy to use. You can spray it on, or brush it on. It's fast drying too. Only 15 minutes between coats! A good replacement product for water based urethane is General Finishes Enduro Poly Gloss Water Based Urethane. Learn More
  37. Cue Shaft Cleaner
    Starting at $8.00

    Made to use on your lathe to clean the chalk and dirt out of the shaft. Learn More
  38. Cue Shaft Sealer (Click for Replacement Product Info)
    Starting at $10.00

    Out of stock

    Our Shaft Sealer is used after cleaning and before wax to seal the pores on the shaft. The best replacement product for Shaft Sealer is Mohawk Lacover 30. Learn More
  39. Cue Wax for Shafts
    Starting at $8.00

    A special Carnuba Cue Wax blend that makes your cue shaft as smooth as silk. Learn More
  40. Dial Calipers
    $35.00

    Dial Calipers, .001 -6" (for checking diameters) Learn More
  41. Dial Indicator - 1 Inch
    $40.00

    1” dial indicator mounts on cross-slide or carriage for checking run out, setting up taper bars and cutting exact diameters. Learn More
  42. Dial Indicator - 2 Inch
    $50.00

    2” dial indicator mounts to bed next to carriage for cutting rings, butt plates and boring holes to exact lengths. Learn More
  43. Dremel Mount for Cue Smith Tool Post
    $30.00

    Dremel Mount for Cue Smith Tool Post (3/4-12 mount) Learn More
  44. Gear Motor For Finishing
    $195.00

    This is a variable speed slow rotating gear motor to hook up to your Cue Smith lathe to apply finish like the Cue Cote or other finishes that need to the cue to slow rotate while curing. Learn More
  45. Jeweler's Saw and 1/4" Arbor
    Starting at $35.00

    Jewelers Saw and 1/4" arbor for parting off joint rings with router. Learn More
  46. Latex Tubing
    $5.00

    Latex tubing for wrapping pressure around the cue when gluing in inlays or points. 3 foot lengths. Learn More
  47. Lathe Inserts
    Starting at $12.00

    Lathe inserts for turning butts (5/16-18, 5/16-14, 3/8-10 & Radius/ Ball Screw) Learn More
  48. Lathe Pin - Universal Shaft Driver
    $25.00

    Universal Shaft Driver (Stainless lathe pin with pointed rubber driver for spinning non standard thread shafts). Learn More
  49. Lathe Pins
    Starting at $12.00

    Lathe pins for turning shafts (5/16-18, 5/16-14, 3/8-10, Cue Tech/ Scorpion style & Radius/ Ball Screw). Learn More
  50. Live Center - Off-Setting #2 or #3 Morse Taper
    $150.00

    Off-Setting Live Center for cutting tapers and point grooves #2 or #3 Morse Taper Learn More
  51. Live Center - Off-setting for cutting tapers 3/8" shank
    $85.00

    Off-setting live center for cutting tapers or point grooves 3/8" straight shank smaller unit. Learn More
  52. Live Center Large 1" diameter 60º Degree (3/8 shank)
    $35.00

    Large 1" diameter 60 degree live center (3/8 shank) Learn More
  53. Live Center Large Concave 3/8 shank
    $35.00

    Large Concave Live Center with 3/8 shank Learn More
  54. Large Concave Live Center MT#2
    $45.00

    Large Concave Live Center (#1 MT) Large Concave Live Center (#2 MT) Learn More
  55. Live Center Small Concave 3/8 shank
    $35.00

    Small Concave Live Center with 3/8 shank Learn More
  56. Live Center Small Diameter 60 degree
    $30.00

    Small Diameter Live Center for cutting shafts (1/2 shank), 60 degree Learn More
  57. Metal Dust Cover for Bed
    $25.00

    The metal dust cover for bed eliminates getting glue, dust, or finish on bed. Learn More
  58. Pinion Gear
    Starting at $8.00

    Pinion Gear (For use in Handwheel and Power Feed) Learn More
  59. Point taper Bar 15 inch
    $35.00

    Point taper Bar 15 inch Learn More
  60. Point taper bar for butt sleeve 5 Inch
    $25.00

    Point taper bar for butt sleeve 5 Inch Learn More
  61. power feed auto stop bracket
    $40.00

    The power feed auto stop bracket is removable and trips the power feed switch when your cutter reaches the place you want it to stop. (Only for the Deluxe Cue Smith package one power feed type.) Learn More
  62. Power Feed Auto Stop Electronic Type
    $65.00

    Power Feed Auto Stop Electronic Type Learn More
  63. Router Bit - Horizontal V-Bit 3/4"
    $35.00

    Horizontal V Bit 3/4" Learn More
  64. Router Bit - Six Wing Cutter 1.25"
    $59.00

    1.25" diameter 6 Wing Cutter with 1/4" shank
    (Use for ultra smooth finish passes on shafts.)

    Learn More
  65. Router Bit - Straight 3/4" Bit
    $20.00

    Straight 3/4" Bit for tapering cues and more Learn More
  66. Router Bit - Vertical V Bit 1"
    $55.00

    Vertical V Bit 1" (inch) For cutting Point Grooves Learn More
  67. Router Bit - Vertical V Bit 5/8"
    $45.00

    Vertical V Bit 5/8" for cutting point grooves Learn More
  68. Router Multi Position Mounting Bracket
    $95.00

    Out of stock

    Vertical Position Router Mounting Bracket. Fits the newer series Porter Cable Laminate Trimmers. It will allow PCE6430 laminate trimmer to mount in multi-positions. Learn More
  69. Router Vertical Position Mounting Bracket
    $45.00

    Out of stock

    Vertical Position Router Mounting Bracket. Fits 7310 and the newer series Porter Cable Laminate Trimmers. It will allow 7310 laminate trimmer to mount in multi-positions and newer models in vertical position. Learn More
  70. Router with Deluxe Multi-Position Bracket
    $250.00

    Out of stock

    Router with Deluxe Multi-Position Mounting Bracket. Also includes spur driver and 3/4" router bit. Will work in vertical, horizontal and angled positions on our Deluxe Cue Smith Lathe. Works in Vertical position on smaller lathes. Learn More
  71. Router with Vertical Mounting Bracket
    $200.00

    Out of stock

    Router with Standard Vertical Mounting Bracket. Also includes spur driver and 3/4" router bit. Will work in vertical position on our Deluxe Cue Smith Lathe and on smaller lathes. Learn More
  72. Shaft Wood #1 Mix Grade

    Wood hand selected and graded for custom cues!

    1" X 30" Hard Rock Maple Shaft Dowels or White Ash Shaft Dowels

    #1 Mix Yields Approximately
    50% #1 or AAA Grade
    40% #1.5 & #2 or A+ to B Grades
    10% #3 or C Grade

    Learn More
  73. Spur Driver
    $20.00

    Spur driver. Learn More
  74. Steady Rest for House Cues
    $95.00

    House Cue Steady Rest (Cue Smith Type) Learn More
  75. Steady Rest for Metal Lathe
    $150.00

    Mounted just on the bearing so you can mount it in your metal lathe steady rest or on your wood lathe. Learn More
  76. Steady Rest with Deluxe Chuck: Deluxe Size
    $200.00

    The steady rest with deluxe chuck mounted on it. 1.4" bore and self centering. The Deluxe height. Learn More
  77. Steady Rest with Deluxe Chuck: Mid Size
    $175.00

    The steady rest with deluxe chuck mounted on it. 1.4" bore and self centering. Lower height Mid Size type. Learn More
  78. Tenon Threader for Ferrule (5/16-18)
    $40.00

    Tenon Threader for Ferrule (5/16-18) Learn More
  79. Tenon Threader for Stainless Joint
    $45.00

    Tenon Threader for Stainless Joint, (5/8-11) or (5/8-18) your choice. Learn More
  80. The Road Bridge
    $95.00

    The Road Bridge is a telescoping portable bridge with a very unique bridge head design that also pivots to any position. It allows you to shoot center, ball as well as top and bottom spin. The tall design also allows you to shoot over multiple balls that normal bridges will not reach. You can rest your hand on it for super jump shots or masse shots. You can also use it for jump shots in the middle of the table. Learn More
  81. Thread Milling Attachment
    Starting at $450.00

    It has the ability to mill inside and outside threads with the included Dremel Tool and bits. You can make clean threads for carom cues or thread on your, butt plates, joints and ferrules. You can even thread the forearm and handle together without having to tap the threads.

    Includes Dremel tool, two carbide thread mill bits, and your choice of one thread gear/ belt set: $575 on Deluxe package #1 and $450 on Deluxe package #2 with leadscrew powerfeed.

    Thread choices: 8, 10, 11, 12, 14, 16, 18 and 20 threads per inch.

    Extra additional thread gear/belt combinations $65 each.

    Extra Thread Milling carbide bits are (1/8" shank one internal and one exteral threading bits) $50 each.

    Learn More
  82. Tool Bits Boring Bar

    Extra 1/4" tool bits.

    • Boring Bar tool bit
    • For boring inside diameter holes from 1/2" and larger Learn More
  83. Tool Bits Cut Off

    Extra 1/4" tool bits .

    • Cut Off Tool Bit
    • This bit is used for parting off material like rings and ferrule material. Learn More
  84. Right and Left Hand Bits

    Extra 1/4" tool bits.

    • Standard Right or Left Hand
    • This bit is ground so it can be used as a right hand or left hand bit. A right hand bit is used for facing and cutting tenons and cuts from right to left. A left hand bit cuts from left to right. Learn More
  85. Tool Bits Round Nose

    Extra 1/4" tool bits.

    • Round Nose Tool Bit
    • For turning smoother cuts on ferrules and rings in both directions. Learn More
  86. Tool Bits Set of 6
    $45.00

    Extra 1/4" tool bits.(One of each)

    • Standard Right or Left Hand
    • Round Nose Tool Bit
    • Boring Bar Tool Bit
    • Cut Off Tool Bit
    • Square Nose Tool Bit
    Learn More
  87. Tool Bits Square not ground

    Extra 1/4" tool bits.

    • Square not ground
    • This bit is not ground so you can sharpen to make custom grooving bits etc.. Learn More
  88. Toolpost - Boring Bar Holder for Quick Change TP 3/8"
    $30.00

    Toolpost for above boring bar: Quick Change Holder. Learn More
  89. Toolpost - Four-Way Toolpost

    Extra Four-Way Toolpost holds four different toolbits. Learn More
  90. Toolpost - Quick Change Toolpost System
    Starting at $135.00

    Quick Change Toolpost with 4 tool holders (Two square tool holders, one cut off blade holder and one 3/8" boring bar holder). Learn More
  91. Toolpost - Tool Holders for Quick Change Toolpost

    Extra tool holders for Quick Change Toolpost. Extra tool holders $25 each or 5 for $20 each. Learn More
  92. Toolpost - Two-Way Toolpost Regular

    Extra Two-Way Toolpost Learn More
  93. Toolpost - Two-Way Toolpost Tall
    $15.00

    Extra Two-Way Toolpost (Tall) Learn More
  94. Veneer Fixture
    $75.00

    Veneer Fixture for cutting 45 degree angles on your veneers. (Requires router table or overhead router like shown in Advanced Volume One DVD plus 5/8 or one inch vertical v-bit). Can also be used on a table saw with blade set at 45 degrees) Learn More
  95. Weight Bolt Tap Extra Long 8" 3/8-16
    $65.00

    Weight Bolt Tap Extra Long 8" 3/8-16 use .312" drill or coring drill. Learn More

Grid List

Set Descending Direction

95 Item(s)